Our church recently remodeled, and replaced our acoustic drums with electric drums. The size of our sanctuary just couldn't handle acoustic very well (too small/loud). The problem was, once we hooked up the electric drums we had an issue where they would periodically "clip" (pop in the speakers) when hit harder. This didn't seem to be a consistent repeatable thing, it just kept happening consistently-random. To avoid this, we had to pull the drum kit volume down to 3 or less (Default is 13).
Additionally, there was this TERRIBLE BUZZ in the speakers. NO matter what volume level you put the drum kit on, the buzz was still there (Same level). When we pulled the drum volume down on the mixing board, we could reduce the volume of the buzz, but not eliminate it altogether, and then, all the other instruments/vocals were overpowering the drums.
So i did some research and concluded that we must be experiencing a "Ground Loop". After reading reviews on this product, i though i would give it a try. I installed this between the drum kit and the snake. When i powered on the sound system, i was shocked that there was NO SOUND. No buzz, no hum, no noise of any kind. it didn't even sound like i had turned anything on. Our sound system has NEVER been that quiet, even before the remodel. My first thought was "Man, this thing isn't working, now i have NO sound". As i walked toward the box to start trouble shooting, it occurred to me that i should at least TEST the drums first. Guess what, they WORKED. The box was just THAT GOOD. Praise God. Additionally, this also seemed to fix the Popping / Clipping volume issue we had previously as i can now put the drums back on the default volume level of 13 with no issues.
| 商品尺寸 | 16.26 x 10.92 x 7.87 cm; 884.51 克 |
|---|---|
| 制造商 | Radial Engineering |
| 型号 | R8001102 |
| 商品重量 | 885 g |
