商品尺寸 | 18.03 x 11.94 x 3.05 cm; 4.54 克 |
---|---|
品牌所属地 | 美国 |
产品颜色 | 黑色 |
包装清单 | 电缆*1 |
制造商 | Monoprice |
型号 | 104761 |
型号年份 | 2014 |
保修说明 | 有限保修 |
商品重量 | 4.54 g |
Monoprice XLR公头转1/4英寸(约0.6cm)TRS公头电缆,16AWG,高保真,消除录音室和舞台上的噪音,镀金,6英尺(约1.8m)
Monoprice 6ft Premier Series XLR Male to 1/4inch TRS Male 16AWG Cable (Gold Plated)
页面含机器翻译,中文仅供参考,以原文为准

-
买满2件售价9.5折优惠。
购买亚马逊海外购活动商品满2件,即可享受售价9.5折优惠。 点击查看全部参加活动商品 由 亚马逊美国 提供。 如何获得促销优惠 (促销说明)
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥36.61×3期 | ¥2.47 (2.3%) | ¥109.83 |
¥18.74×6期 | ¥4.83 (4.5%) | ¥112.19 |
¥9.70×12期 | ¥8.05 (7.5%) | ¥115.41 |
提升您的购买力
- (877)271-2592
- 使用方便
- Monoprice's line of Professional Audio cables brings you high performance cables at rock bottom prices
- Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run
- They have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal
亚马逊海外购
经常一起购买的商品
产品信息
技术细节
更多信息
ASIN | B001UJEKZ6 |
---|---|
用户评分 |
1.0 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第1,064名乐器 (查看商品销售排行榜乐器) 商品里排第13名麦克风连接线 |
Amazon.cn上架时间 | 2015年7月25日 |
我来补充
商品描述
Monoprices line of Professional Audio cables brings you high performance cables at rock bottom prices. Whether youre connecting broadcast equipment, instruments for your band or your high end entertainment system, Monoprice has the interconnect cables for you. Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilizes their braid as a signal return, balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal. This prevents ground loop issues. XLR to 1/4" TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage. Our new Permier Series cables up the ante in terms of construction quality and performance.
Monoprices line of Professional Audio cables brings you high performance cables at rock bottom prices. Whether youre connecting broadcast equipment, instruments for your band or your high end entertainment system, Monoprice has the interconnect cables for you. Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilizes their braid as a signal return, balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal. This prevents ground loop issues. XLR to 1/4" TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage. Our new Permier Series cables up the ante in terms of construction quality and performance.
产品描述
Monoprice的专业音频电缆系列将以低价格为您提供高性能的电缆。无论您是连接广播设备、乐队器材或是高端娱乐系统,Monoprice都能为您提供适合的互连电缆。平衡式音频电缆利用阻抗平衡传输线减弱电磁和射频噪声并拓宽电缆运行的范围。此外,与利用自身编织作为信号返回的标准非平衡式RCA互联不同的是,平衡式电缆的单独的编织屏蔽可以在不将干扰调制进信号的情况下,对干扰提供额外的阻力。这样,可以防止接地回路问题。XLR 转1/4" TRS平衡专业音频电缆可以在录音室和舞台上提供高保真的音效并能去除噪声。我们的新型Permier系列电缆质优价廉。
产品参数
Monoprice 6英尺XLR 公转1/4英寸 TRS 公电缆
包装清单
电缆*1
品牌简介
Monoprice是一家世界领先的电子商务零售商,专为全球专业人士和消费者提供超过6000种品质可靠、价格优良的电子产品和配件。该公司成立于2002年,通过可靠的商业模式为客服提高卓越的产品质量与优质的客户服务,并因此在行业内声名远扬,该公司所使用的商业模式去除了整条供应链内的层层利润,以远低于市场销售的价格以及无与伦比的速度与服务为客户提供卓越优质的产品。
买家评论
此商品在美国亚马逊上最有用的商品评论

Note that the sleeve of a phone jack is very often connected to chassis ground. In this cable the sleeve is connected to the XLR shell so it is very likely that there will be a direct connection between the two chassis of concern.
If the XLR equipment used with this cable has pin 1 connected to chassis ground then any noise that is picked up on the cable shield will be injected directly into the audio stream. Worse, any differences in the chassis ground potential between the driven end and the receiving end will cause a ground current to flow through the shield (i.e. ground loop) which can cause very severe noise problems.
Mogami and other quality cable builders do not make any connection to the XLR shells at all to avoid ground loops. In practice only pin 2 and pin 3 are really needed because well designed equipment only uses the voltage difference between pin 2 and pin 3 to transmit/receive signals. Hence any noise common to the conductors on pin 2 and pin 3 will cancel. The ability to cancel such common mode noise is a main reason that XLR is the best analog interface.

2021年9月15日 在美国审核
Note that the sleeve of a phone jack is very often connected to chassis ground. In this cable the sleeve is connected to the XLR shell so it is very likely that there will be a direct connection between the two chassis of concern.
If the XLR equipment used with this cable has pin 1 connected to chassis ground then any noise that is picked up on the cable shield will be injected directly into the audio stream. Worse, any differences in the chassis ground potential between the driven end and the receiving end will cause a ground current to flow through the shield (i.e. ground loop) which can cause very severe noise problems.
Mogami and other quality cable builders do not make any connection to the XLR shells at all to avoid ground loops. In practice only pin 2 and pin 3 are really needed because well designed equipment only uses the voltage difference between pin 2 and pin 3 to transmit/receive signals. Hence any noise common to the conductors on pin 2 and pin 3 will cancel. The ability to cancel such common mode noise is a main reason that XLR is the best analog interface.




I'm almost tempted to do a demo of all my failed cables just in hopes that someone believes me and doesn't waste their time. I know there are overwhelmingly positive reviews but if you're reading this, please take my word for it.

Purchased the Monoprice 104761 6Ft Premier Series XLR Male to 1/4Inch TRS Male 16AWG Cable (Gold Plated) in combination with a pair of 10Ft XLR Male to Female from the identical product category to use with my Yamaha HS7's and HS8S Active Monitors and Subwoofer. This was an upgrade from the hodge-lodge Hosa/Monster cable combination used in conjunction with a NI KA6 Audio Interface for a few years.
Noise rejection was improved, but this is an arbitrary assessment and I've no benchmarks to back that up. The cable thickness is not so much to make the cables inflexible, but they retain sufficient heft to install confidence - certainly an improvement over my previous cables and at this price point I'm pleased. Blue Tooth interference with the Active Monitors remains an issue - have to remember to disable Blue Tooth on the iPhone and iPad in close proximity - but that has nothing to do with these cables.
Just ordered some 10Ft USB cables from Monoprice to use with my NI MIDI instruments as I'm finding the default NI Cable lengths restrictive in my desired floor layout of the home office/music space. Hope those work as well for me as these do.