商品尺寸 | 19.05 x 17.02 x 4.57 cm; 250 克 |
---|---|
产品颜色 | 黑色 |
制造商 | Monoprice Inc. |
型号 | 104762 |
型号年份 | 2016 |
保修说明 | 终身质保 |
商品重量 | 250 g |
Monoprice 104762 10 英尺(约 3m) Premier 系列 XLR 公头至 1/4 英寸 TRS 公头 16AWG 电缆黑色
Monoprice 104762 10-Feet Premier Series XLR Male to 1/4-Inch TRS Male 16AWG Cable
页面含机器翻译,中文仅供参考,以原文为准

-
买满2件售价9.5折优惠。
购买亚马逊海外购活动商品满2件,即可享受售价9.5折优惠。 点击查看全部参加活动商品 由 亚马逊美国 提供。 如何获得促销优惠 (促销说明)
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥32.77×3期 | ¥2.21 (2.3%) | ¥98.27 |
¥16.73×6期 | ¥4.32 (4.5%) | ¥100.38 |
¥8.66×12期 | ¥7.20 (7.5%) | ¥103.26 |
提升您的购买力
- Monoprice 专业音频线以低廉的价格为您带来高性能电缆。
- 平衡音频电缆利用阻抗平衡线减少 EM 和 RF 噪音并扩展电缆的有效运行范围
- 它们具有单独的编织屏蔽层,可在不调制干扰到信号中提供额外的抵抗干扰
- Monoprice's line of Professional Audio cables brings you high performance cables at rock bottom prices
- Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run
- They have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal
亚马逊海外购
经常一起购买的商品
产品信息
技术细节
更多信息
ASIN | B001UJELJ6 |
---|---|
用户评分 |
1.0 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第1,065名乐器 (查看商品销售排行榜乐器) 商品里排第13名麦克风连接线 |
Amazon.cn上架时间 | 2015年12月23日 |
我来补充
商品描述
Monoprices line of Professional Audio cables brings you high performance cables at rock bottom prices. Whether youre connecting broadcast equipment, instruments for your band or your high end entertainment system, Monoprice has the interconnect cables for you. Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilize their braid as a signal return, balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal. This prevents ground loop issues. XLR to 1/4" TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage. Our new Permier Series cables up the ante in terms of construction quality and performance.
Monoprices line of Professional Audio cables brings you high performance cables at rock bottom prices. Whether youre connecting broadcast equipment, instruments for your band or your high end entertainment system, Monoprice has the interconnect cables for you. Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilize their braid as a signal return, balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal. This prevents ground loop issues. XLR to 1/4" TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage. Our new Permier Series cables up the ante in terms of construction quality and performance.
Monoprice Premier 系列 XLR 公头,1/4英寸 TRS 16 AWG 电缆 ( 镀金 )
买家评论
此商品在美国亚马逊上最有用的商品评论

Note that the sleeve of a phone jack is very often connected to chassis ground. In this cable the sleeve is connected to the XLR shell so it is very likely that there will be a direct connection between the two chassis of concern.
If the XLR equipment used with this cable has pin 1 connected to chassis ground then any noise that is picked up on the cable shield will be injected directly into the audio stream. Worse, any differences in the chassis ground potential between the driven end and the receiving end will cause a ground current to flow through the shield (i.e. ground loop) which can cause very severe noise problems.
Mogami and other quality cable builders do not make any connection to the XLR shells at all to avoid ground loops. In practice only pin 2 and pin 3 are really needed because well designed equipment only uses the voltage difference between pin 2 and pin 3 to transmit/receive signals. Hence any noise common to the conductors on pin 2 and pin 3 will cancel. The ability to cancel such common mode noise is a main reason that XLR is the best analog interface.

2021年9月15日 在美国审核
Note that the sleeve of a phone jack is very often connected to chassis ground. In this cable the sleeve is connected to the XLR shell so it is very likely that there will be a direct connection between the two chassis of concern.
If the XLR equipment used with this cable has pin 1 connected to chassis ground then any noise that is picked up on the cable shield will be injected directly into the audio stream. Worse, any differences in the chassis ground potential between the driven end and the receiving end will cause a ground current to flow through the shield (i.e. ground loop) which can cause very severe noise problems.
Mogami and other quality cable builders do not make any connection to the XLR shells at all to avoid ground loops. In practice only pin 2 and pin 3 are really needed because well designed equipment only uses the voltage difference between pin 2 and pin 3 to transmit/receive signals. Hence any noise common to the conductors on pin 2 and pin 3 will cancel. The ability to cancel such common mode noise is a main reason that XLR is the best analog interface.




I'm almost tempted to do a demo of all my failed cables just in hopes that someone believes me and doesn't waste their time. I know there are overwhelmingly positive reviews but if you're reading this, please take my word for it.

Purchased the Monoprice 104761 6Ft Premier Series XLR Male to 1/4Inch TRS Male 16AWG Cable (Gold Plated) in combination with a pair of 10Ft XLR Male to Female from the identical product category to use with my Yamaha HS7's and HS8S Active Monitors and Subwoofer. This was an upgrade from the hodge-lodge Hosa/Monster cable combination used in conjunction with a NI KA6 Audio Interface for a few years.
Noise rejection was improved, but this is an arbitrary assessment and I've no benchmarks to back that up. The cable thickness is not so much to make the cables inflexible, but they retain sufficient heft to install confidence - certainly an improvement over my previous cables and at this price point I'm pleased. Blue Tooth interference with the Active Monitors remains an issue - have to remember to disable Blue Tooth on the iPhone and iPad in close proximity - but that has nothing to do with these cables.
Just ordered some 10Ft USB cables from Monoprice to use with my NI MIDI instruments as I'm finding the default NI Cable lengths restrictive in my desired floor layout of the home office/music space. Hope those work as well for me as these do.