Using the same claw screws is doable, but the holes in the Tremlo-No claw do not line up with the holes for the original PRS claw, they are wider apart. Had to fill the holes and make new ones. I centered the new claw in the tremlo bay. The large clamp fits the block, but I discovered the clamp partly covers one of the string holes a bit - a fraction more to one side would place it between the holes but I did not think of this when I made the new claw screw holes. Alignment begins with the claw placement. Should be OK, I will know for sure once I need to change the strings. Everything else works great - bridge is solid and level, no change to string action.
Update: I discovered the original PRS claw screws are too short. I removed the Tremlo-No clamp to remove a shim and the tension pulled out one of the claw screws. I then noticed the Tremlo-No claw is not as deep as the PRS model, so to keep the same distance relationship between the claw, springs, and block (to maintain proper bridge height and angle), the screws barely enter the body - not enough to create a firm hold. Longer screws will be needed. Reduced review to 2 stars. I can fix this, but this product is not a PRS friendly option.
| 商品尺寸 | 9.5 x 4.7 x 1 cm; 22.68 克 |
|---|---|
| 制造商 | Allparts |
| 型号 | BP-2006-010 |
| 尺寸 | 0 |
| 商品重量 | 22.7 g |
