商品尺寸 | 4 x 2 x 2 cm; 60 克 |
---|---|
产品颜色 | 黑色 |
制造商 | GOLDRING |
商品重量 | 60 g |
Goldring gl0025 m 电池 黑色
Goldring gl0025 m Cell Black
页面含机器翻译,中文仅供参考,以原文为准
Goldring gl0025 m Cell Black
|
人气
广告
¥2,504.54¥2,504.54

促销信息
Prime会员专享 商品满1件可享6%的折扣
共1个促销
-
Prime会员专享 商品满1件可享6%的折扣
Prime会员专享 [Prime会员专享]购买亚马逊海外购活动商品满1件,即可享受售价9.4折优惠。 点击查看全部参加活动商品 由 亚马逊德国 提供。 如何获得促销优惠 (促销说明)
12期7.5%费率,每月仅 ¥224.42 最高12期,多种分期方式可选 了解更多
灵活选择分期付款:结算时,选择花呗分期和您需要的分期数。此处仅为按商品金额(未包括税费)估算的示例,实际金额以结算金额为准。
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥854.06×3期 | ¥57.60 (2.3%) | ¥2,562.14 |
¥436.24×6期 | ¥112.70 (4.5%) | ¥2,617.24 |
¥224.42×12期 | ¥187.84 (7.5%) | ¥2,692.38 |
提升您的购买力
- Goldring 是一家专业制造音频材料公司,于 1906 年由 Brothers Scharf 成立。
- 1042 是*于要求系统的终极声波性能的电池音频,以及用户非常轻松地更换钻石(Stylus)的灵活性。
- Goldring 1042 金芯 Diamond Gyger S 频率响应:20 Hz - 20 kHz +/-3dB 通道平衡,dB @ 1 kHz
- Goldring is a company specialized in the manufacturing of audio material established in 1906 by the Brothers Scharf.
- The 1042 is a cell audio dedicated to demanding the ultimate sonic performance of the system, as well as the flexibility of a diamond (Stylus) replaced very easily by the user.
- Goldring 1042 Gold moving cell Diamond Gyger S frequency response: 20 Hz - 20 kHz +/-3dB channel balance within dB @ 1 kHz
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B0056GPVB6 |
---|---|
用户评分 |
4.8 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第6,714名电子产品 (查看电子产品商品销售排行榜) 商品里排第34名功放 |
我来补充
商品描述
1042 是一款唱片盒,适用于需要系统提供终极声波性能的听筒,并方便用户更换手写笔。
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
4.6 颗星,最多 5 颗星
2 条评论

Scott Freimann
5.0 颗星,最多 5 颗星
Performance plus.
2021年10月28日 -
已在美国亚马逊上发表已确认购买
Expectations have been met. This cartridge has received rave reviews, and it has lived up to them. Superb definition, textural layering and a "naturalness" to the music.
1 个人发现此评论有用

JB
4.0 颗星,最多 5 颗星
Fussy High Performance MM Cartridge - Not For Everyone
2019年3月16日 -
已在美国亚马逊上发表
Overall a very nice cart. Good tracker, excellent detail, neutral overall with spec'd loading. Works best with medium to med/high-mass arms, due to the compliance of the suspension. If you have a low-mass tonearm, I'd recommend looking at something else, maybe the Goldring 2000 series instead.
IME the 1042 has a long break in period and a fussy setup, but now that I've got things dialed in and the cartridge suspension has loosened up I'm enjoying it a lot. I'll just say that if you are unwilling to go the extra mile with setup, forget about this cartridge. I ended up having to adjust the azimuth a little bit and in order to get the VTA right, I had to switch headshells.
I found the cart tracked better at 2.0g rather than 1.7g. I had to experiment with anti-skate and ended up setting it with a CBS-STR 100 test record to get it right. Too much or too little and things will sound sibilant, especially during the run in period.
It's also a hot cart, with 6.5 MV output. That means you'll need to dial back phono preamp gain if you can, ideally to something around 34dB. If you can't do that, you'd better HOPE you phono preamp has a very generous overload margin. With one particular phono preamp I got excessively harsh sibilants and high frequencies along with a grainy overall sound, despite the fact that it sounded great with other cartridges. The 1042 led me to seek out a more robust phono preamp and I ended up with a Graham Slee Reflex M. This handles the 1042's high output with ease and the problems I had before went away.
Even though I like this cartridge a lot, I will admit the Gyger-S stylus on it doesn't track inner grooves *quite* as well a some of the Shibata and Microline/Microridge styli I've used. Whether that is due to the relatively stiff compliance of the 1042 or the Gyger-S stylus shape I cannot say.
One major downside is the U.S. pricing on this cartridge at the time of this writing. If you don't mind ordering it from Europe, you can get a much better price.
Bottom line, a very good cartridge but not for everyone.
IME the 1042 has a long break in period and a fussy setup, but now that I've got things dialed in and the cartridge suspension has loosened up I'm enjoying it a lot. I'll just say that if you are unwilling to go the extra mile with setup, forget about this cartridge. I ended up having to adjust the azimuth a little bit and in order to get the VTA right, I had to switch headshells.
I found the cart tracked better at 2.0g rather than 1.7g. I had to experiment with anti-skate and ended up setting it with a CBS-STR 100 test record to get it right. Too much or too little and things will sound sibilant, especially during the run in period.
It's also a hot cart, with 6.5 MV output. That means you'll need to dial back phono preamp gain if you can, ideally to something around 34dB. If you can't do that, you'd better HOPE you phono preamp has a very generous overload margin. With one particular phono preamp I got excessively harsh sibilants and high frequencies along with a grainy overall sound, despite the fact that it sounded great with other cartridges. The 1042 led me to seek out a more robust phono preamp and I ended up with a Graham Slee Reflex M. This handles the 1042's high output with ease and the problems I had before went away.
Even though I like this cartridge a lot, I will admit the Gyger-S stylus on it doesn't track inner grooves *quite* as well a some of the Shibata and Microline/Microridge styli I've used. Whether that is due to the relatively stiff compliance of the 1042 or the Gyger-S stylus shape I cannot say.
One major downside is the U.S. pricing on this cartridge at the time of this writing. If you don't mind ordering it from Europe, you can get a much better price.
Bottom line, a very good cartridge but not for everyone.
14 个人发现此评论有用