商品体积 | 84 x 31 x 110.1 厘米 |
---|---|
颜色名称 | 白色黑色 |
材质类型 | 其他 |
表面处理 (工艺或颜色等) | 粘合剂 |
口罩特征 | 胶带长度:5 英尺 ^ 胶带尺寸:0.95 英寸 |
供电方式 | 交流电 |
商品类型 | 男女皆宜 |
是否需要电池驱动 | 不是 |
本商品是否包含电池 | 不是 |
DYMO 用于 DYMO 工业 RhinoPro 标签机的 DYMO 工业热缩管,白底黑字,1英寸 约2.54厘米 (1805443)
DYMO RhinoPRO Adhesive Heat-Shrink Tubes, 1-inch, 5-Foot roll, White (1805443)
页面含机器翻译,中文仅供参考,以原文为准
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥136.74×3期 | ¥0.00 (0.0%) | ¥410.20 |
¥71.46×6期 | ¥18.46 (4.5%) | ¥428.66 |
¥36.83×12期 | ¥30.77 (7.5%) | ¥440.97 |
提升您的购买力
- 用于高端电缆识别。
- 3:1 收缩率有助于确保电线和电缆牢固贴合
- 使用任何 Rhino 工业标签机直接在热收缩管上打印。
- 符合 MIL-M-81531、MIL-STD-202G、SAE-DTL-23053/5(1 和 3 类)和 UL 标准。
- 比利时制造。 与 LabelManager、LabelPoint、LabelWriter DUO 和较旧的 DYMO 标签打印机一起使用。
- For high-end cable identification.
- A 3:1 shrink ratio helps ensure a secure fit on wires and cables
- Print directly on heat-shrink tubes with any Rhino industrial label maker.
- Meets MIL-M-81531, MIL-STD-202G, SAE-DTL-23053/5 (Class 1 & 3) and UL standards.
- Made in Belgium. Use with LabelManager, LabelPoint, LabelWriter DUO and older DYMO label printers.
亚马逊海外购
商品描述
DYMO RhinoPRO 胶粘热收缩管,1"、18 英尺卷,白色(1805443)。 用于高端电缆识别。 收缩率为 3:1 有助于确保与电线和电缆安全贴合,使用任何 Rhino 工业标签机直接在热收缩管上打印。 符合 MIL-M-81531、MIL-STD-202G、SAE-DTL-23053/5(1 类和 3 类)和 UL 标准。 比利时制造。 与 LabelManager、LabelPoint、LabelWriter DUO 和较旧的 DYMO 标签打印机一起使用。
生产商提供信息


At a Glance:
- Use with DYMO Rhino
- UV-, water-, and temperature resistant
- Adheres to curved and textured surfaces
- Oil- and chemical-resistant
- Works indoors and outdoors
DYMO Rhino Industrial Labels
Bring order to your facility or jobsite with DYMO Rhino Industrial Labels. Intended for use with DYMO Rhino printers, these durable labels resist UV light, moisture, and extreme temperatures. They are designed to adhere to even curved and textured surfaces with an industrial-strength adhesive, and they feature a professional look that will leave your work looking organised.
DYMO Rhino Industrial Labels are available in nylon, polyester, and heat shrink label tube varieties.
What's in the Box:
- 24 mm x 1.5 m heat shrink label tubes, black print on white

Industrial-Strength Adhesive Works Almost Anywhere
DYMO Rhino Industrial Labels feature an industrial-strength adhesive designed to hold labels in place on textured and curved surfaces both indoors and out. Both the adhesive and text resist UV light, moisture, and extreme temperatures for long-lasting results. The label tubes provide a smudge-resistant solution for wire and cable marking and other tough applications.

Designed for Professionals
DYMO Industrial Labels are designed to meet the needs of datacom, electrical, audio/visual, security, construction, broadcast, and maintenance, repair, and operations professionals. Use them for datacom installations, electrical labelling, facilities management, and other industrial applications.
Choose the Right DYMO Industrial Label for You
|
|
|
|
---|---|---|---|
Coloured Vinyl LabelsIdeal for general labelling or colour coding, these flexible, tear-resistant labels stand out anywhere general identification and supplementary information is needed. |
Permanent Polyester LabelsWith their strong adhesive and polished finish, these polyester labels are a reliable labelling solution for panels, blocks, faceplates, shelves, bins, beams, and more. |
Flexible Nylon LabelsThese labels feature a flexible design that has no shape memory, so they can easily wrap around curved surfaces. The tear-proof nylon material resists damage when pulled through tight spaces or conduits, making the labels ideal for wire and cable marking. |
Heat Shrink TubingConstructed from industrial-grade polyolefin, these heat shrink label tubes feature a 3:1 heat shrink ratio for a snug fit. You can also conveniently print directly on cable tubing itself for seamless cable and wire identification. |
产品信息
技术细节
更多信息
ASIN | B005MR4OIU |
---|---|
用户评分 |
4.7 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第9,983名办公用品 (查看办公用品商品销售排行榜) 商品里排第96名标签带 |
Amazon.cn上架时间 | 2015年6月17日 |
制造商 | E7QYL |
我来补充
购买提示
亚马逊海外购商品由亚马逊海外网站出售,适用使用境外网站所在的原销售地的法律、法规、标准、规范和惯例等,因此可能在以下方面区别于在中国境内出售的商品:
• 尺码:鞋服尺码表,单位转换表。备注: 如果销售品牌提供了具体的尺码表,请以品牌尺码表为准。
• 电压和电源插座:电子产品可能不支持中国的电压环境、电源插座等规格标准,需配合变压或转换设备等使用。电源使用提示。
• 美妆商品保质期:美妆商品的生产日期/保质期标注可能和国内渠道购买的产品有所区别,详见美妆商品购买提示。
• 售后服务:亚马逊海外购的商品由境外网站所在的原销售地的品牌商提供售后保修,该等保修和其他售后可能不覆盖中国,详情请联系品牌商的售后咨询。
• 标签、手册和说明书:标签、手册和说明书等未译成中文;所载成分、声称、产品描述、参考值和推荐值可能与中国标准或惯例有别。
• 其他:因出售地和使用地人群(特别是儿童、老人和残疾人等)、使用环境、消费场景与习惯不同,可能导致商品不能或不能完全适用于使用目的。
2. 清关服务:
• 根据中国海关的要求,在您购买亚马逊海外购商品时,需要提交订购人的身份证信息(目前仅支持中国居民身份证信息验证)用于清关点击这里查看详情。
• 亚马逊不会以任何理由索要您的银行卡号、验证码等信息。如遇不法分子冒充亚马逊海外购客服向您索取银行账号等信息,请及时通过联系亚马逊海外购客服或报警,敬请提高警惕。
3. 物流配送:
• 关于配送时间的预估仅供参考,实际配送受清关或天气等不可抗力因素的影响,您可在“我的订单”中跟踪包裹查看配送状态,如有疑问请联系客服咨询。
• 亚马逊海外购商品符合海关进出口政策要求,且支持中国除港澳台地区之外的全境配送,但部分偏远地区的配送时间会相应延长,少数商品不支持配送。如果您已成功下单而我们无法为您配送,我们会及时通知您。
• 亚马逊海外购商品目前不支持晚间送货、预约送货、自提等服务。
4. 其他:亚马逊海外购出售的境外商品仅限个人自用,购买行为必须遵循自用、合理数量原则,不得转为其他商业用途,不得再次销售。
5. 需要更多帮助,请查看亚马逊海外购帮助中心。
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
此商品在美国亚马逊上最有用的商品评论

Don't make the same mistake.
The actual flattened diameter of FP-301 is actually a 1/4" WIDER than this Dymo "3/4" heat shrink tube, measuring a full inch wide when flat. If 3M were selling this, I suspect they would label this Dymo 3/4" size as their 1/2" size. The FP-301 fits over a great many connectors, such as CAT-5 with no-snag boots, USB A or B, etc. So I figured I would find a lot of use for these. In practice, they do NOT** fit over a USB A or B connector. Nor will they fit over a booted Cat-5.
**HOWEVER.........Determined to succeed in my initial reason to consider buying this, I have found that in relatively short pieces (an inch or less) this material can be stretched open quite a bit larger, slid over something, and then will still shrink down to its 3:1 shrink ratio with a heat gun. As mentioned in a comment on one of the reviews already posted, one can use some kind of tool (that guy used scissors) which has smooth edges opposing each other to stretch the tube piece open. I used a very large hemostat, such as those sold to remove fish hooks, and managed to stretch it enough so that it did pass over a USB "A" connector's molded plastic portion, and then shrunk it down tightly onto the "strain relief" tail of the USB connector, where the cable comes out of it. So it can be done, with a bit of ingenuity. :) There is actually a Wiki-How article named "How to Expand Heat Shrink Tubing" that shows this process with illustrations. Ideally, if one had a tool that could expand it without tapering, as the scissors or hemostat do, it would be easier to slide over larger objects.
What would be really super is if Dymo, with all the different materials they use for their available label tapes, could come up with some sort of heat shrink tube which is flexible enough to easily stretch bigger after printing from a 3/4" cartridge, and then still shrink down with a heat gun applied, so that larger connectors and electrical cable labels could be produced within the 3/4" maximum width constraint of the Rhino 4200.


I admit it. I'm OCD. I love having things organized and there is no better way to organize your cables than with these labels. I have a ton of cables in my home office. I'm also in a rock band (I use both the terms "rock" and "band" loosely). I am able to label ALL of my cables with these labels. 1/4" TS and TRS cables are a cinch. All of my Ethernet cables have been no problem so far, even ones with boots on them. (Contrary to other reviews, I believe the 1" labels will work on any Ethernet connection. Perhaps the other reviewers were using smaller labels.)
What about XLR cables, you ask? What about other cables with larger connectors on the ends, you ask? I have your solution! I have terrible handwriting and didn't want to use labels that could peel off. So, I found that by using another product in conjunction with these, it is the perfect hybrid approach for larger cables!
Get yourself some of these... Monoprice Marker Cable Tie 4 inch 18LBS, 100pcs/Pack - White
Check out the photos below for the steps. Basically, cut a small notch at the top and bottom of the shrink tube. Insert the Marker Cable Tie as shown. Shrink the tube, trim the ends of the tube, then attach the zip tie to the cable. It's a great, permanent way to neatly label any cable regardless of how thick the cable or the size of the connectors on the ends.
Hope this helps!


评论于 2017年8月26日 在美国 🇺🇸 发布
I admit it. I'm OCD. I love having things organized and there is no better way to organize your cables than with these labels. I have a ton of cables in my home office. I'm also in a rock band (I use both the terms "rock" and "band" loosely). I am able to label ALL of my cables with these labels. 1/4" TS and TRS cables are a cinch. All of my Ethernet cables have been no problem so far, even ones with boots on them. (Contrary to other reviews, I believe the 1" labels will work on any Ethernet connection. Perhaps the other reviewers were using smaller labels.)
What about XLR cables, you ask? What about other cables with larger connectors on the ends, you ask? I have your solution! I have terrible handwriting and didn't want to use labels that could peel off. So, I found that by using another product in conjunction with these, it is the perfect hybrid approach for larger cables!
Get yourself some of these... [[ASIN:B003L13A7K Monoprice Marker Cable Tie 4 inch 18LBS, 100pcs/Pack - White]]
Check out the photos below for the steps. Basically, cut a small notch at the top and bottom of the shrink tube. Insert the Marker Cable Tie as shown. Shrink the tube, trim the ends of the tube, then attach the zip tie to the cable. It's a great, permanent way to neatly label any cable regardless of how thick the cable or the size of the connectors on the ends.
Hope this helps!










