|商品尺寸||20.57 x 14.99 x 5.08 cm; 816.47 克|
|制造商||SPECIALTY TECHNOLOGIES, LLC|
SVS SoundPath 低音炮隔离系统(4 件装)
SVS SoundPath Subwoofer Isolation System (4-Pack)
- 四 (4) 个 SoundPath 隔离弹性脚,带钢制外壳
- 四 (4) 个 ¼-20 x 20 毫米螺丝
- Four (4) SoundPath Isolation Elastomer Feet with Steel Outer Shell
- Four (4) ¼-20 x 20 mm screws
- Elastomer Foot with Optimized Durometer
- Stainless Steel Machine Screws
SVS Sound Path 低音炮隔离系统将低音炮与地板分离,从而产生更紧密、更清洁的声音,减少房间中的嗡声/响声,减少公寓和联排别墅邻居的投诉。 这是隔音的下一个好事! Sound Path 低音炮隔离系统可与任何接受旋入式支脚的品牌低音炮配合使用。 该系统采用广泛的加速计和声学测量开发,具有优化的硬度计弹性体脚,可显著减少地板振动。 Sound Path 低音炮隔离系统以四 (4) 英尺或六 (6) 英尺包装发货,具有三种不同长度的流行螺纹尺寸,以适应各种低音炮,无论品牌如何。 总高度:4.01 厘米 外壳直径:5.82 厘米 脚直径:5.34 厘米
Improve subwoofer performance and reduce rattling (4 Feet)
Fits most brands with included mounting hardware.
The SVS SoundPath Subwoofer Isolation System was engineered to bring out the very best performance from your subwoofer by decoupling and isolating it from the floor. The result: tighter and cleaner sounding bass, less buzz/rattle in the room, and fewer complaints from adjacent neighbors in apartments and townhouses. It’s the next best thing to sound-proofing and perfect for carpeted rooms, hardwood floors or any environment where rattle or vibration is evident.
Inspired by over a decade of experience as a leading subwoofer manufacturer and developed through extensive accelerometer and acoustic measurements, this system features optimized durometer elastomer feet which significantly reduce floor vibration.
Compatible with nearly any brand and model of subwoofer, the SoundPath Subwoofer Isolation System replaces the existing basic OEM screw-in feet in just minutes.
The benefits of the SoundPath Subwoofer Isolation System include:
- Less buzz/rattle from objects in the room.
- Cleaner and tighter sounding bass with less floor boom and vibration.
- Affordable and discreet alternative to platforms and risers.
- Works with any brand subwoofer which accepts screw-in feet.
- Fewer complaints from neighbors in apartments and townhouses.
• 尺码：鞋服尺码表，单位转换表。备注: 如果销售品牌提供了具体的尺码表，请以品牌尺码表为准。
I have 2 SVS SB12-NSD's sitting on hardwood floors in our living room and while how incredible these subs sound, they sent vibrations throughout our entire living room and up through the walls as well which vibrated anything attached to our walls including pictures and fixtures.
Did some research and found that isolation pads helped to reduce or eliminate these vibrations and also help to improve the sound quality of the subs, I didn't really care for how they looked especially since they were wider and longer than my subs. From further research I stumbled across these SVS isolation feet and they were a few dollars cheaper than the isolation pads so I thought I'd give them a try and just return them if they didn't really help.
I can say this much, I'm definitely not returning them! They actually work, the vibrations are pretty much gone and they really did improve the sound quality of the bass. As a bonus, I can turn the volume up louder and the bass stays nice and clean. I also checked with my neighbor and he's hearing a lot less bass coming from our place, even when i have the volume up higher.
These are definitely keepers, I just wish that SVS included these standard on their subs, considering SVS has premium products along with premium prices, I don't think it would kill them to just have these on all their subwoofers :)
My main beef with the item is that they should have been installed on the sub when I bought it from SVS. If I'm purchasing a $2k subwoofer which weighs over one hundred pounds, I should be able to expect it to have some substantial feet on it. It seems like a bit of a cheap move on SVS part to make me purchase these as an aftermarket part.
In summary- a high quality item which is easy to install but probably should have come preinstalled on an SVS subwoofer.
Nice isolating feet but the hole drilled in the feet where the bolt goes through is HUGE. Why couldn’t they just have drilled the hole the correct size? I’ll goe to Lowe’s and match up a washer to fit inside the feet to keep them from moving. The manual states not to drag the sub across the floor asit could damage the feet, probably because of all the play from the over sized whole.
Update: I contacted SVS tech support and was told the large whole was to accommodate various bolt sizes. It should have came with washers that also filled the gap between the bolt and hole. Also the part that goes against the sub is metal up against vinyl. There should have been rubber bonded to the metal. Between those two design changes the feet would have been extremely stable.