Brand | Black Ice |
---|---|
制造商 | Black Ice |
商品尺寸 | 39.8 x 13.3 x 2.95 cm; 900 克 |
Is Discontinued By Manufacturer | 不是 |
颜色 | 黑色 |
是否包含电池 | 不是 |
商品重量 | 900 g |
黑色冰 hwl-r103 Nemesis Gts 360mm 散热器 - 黑色
Black Ice HWL-R103 Nemesis GTS 360mm Radiator - Black
页面含机器翻译,中文仅供参考,以原文为准
欢迎选购其他类似产品。
- 120 毫米 x 3 风扇超薄二通散热器
- 16 FPI 25 微米铜鳍片
- 现在针对低于 800 rpm 的*隐形风扇进行了优化
- 超巡航优化,利用高速风扇实现可扩展性能
- 在同一个 Black Ice GTS 360 外形规格中,管子面积增加 15%
- 120 mm x 3 fan slim form factor two-pass radiator
- 16 FPI 25 Micron Copper Fins
- Now optimized for sub-800 rpm ultra-stealth fans
- Supercruise optimizations for scalable performance with higher speed fans
- 15% more tubing area in the same Black Ice GTS 360 form factor
产品信息
技术细节
更多信息
ASIN | B01636K0VS |
---|---|
用户评分 |
4.6 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第1,664名电脑\IT (查看商品销售排行榜电脑\IT) 商品里排第10名水冷系统 |
Amazon.cn上架时间 | 2017年7月13日 |
我来补充
商品描述
The Black Ice Nemesis 360GTS renders best in class quality and performance for the discriminating casemod professional. Supercruise optimizations exploit low-noise fans for scaled performance in a low-profile triple triple 120mm fan envelope. This allows professional users a single radiator solution for multi-CPU/GPU implementations that simply fits. Technical details: 120 mm x 3 fan slim form factor two-pass radiator 398mm x 133mm x 29.6mm (L x W x H) 16 FPI 25 Micron Copper Fins Now optimized for sub-800 rpm ultra-stealth fans Supercruise optimizations for scalable performance with higher speed fans 15% more tubing area in the same Black Ice GTS 360 form factor Increased internal coolant flow rates Standard G 1/4 inlet/outlet fittings Standard M4 mounting threads Compatible with Black Ice Pro III, Black Ice GTS 360 radiators Black Carbon high quality finish Fully ROHS Compliant 100% Made from conflict-free materials Industry standard Black Ice quality Lifetime warranty against manufacturing defects* * Limited warranty information: www.hardwarelabs.com/nemesis/warranty
The Black Ice Nemesis 360GTS renders best in class quality and performance for the discriminating casemod professional. Supercruise optimizations exploit low-noise fans for scaled performance in a low-profile triple triple 120mm fan envelope. This allows professional users a single radiator solution for multi-CPU/GPU implementations that simply fits. Technical details: 120 mm x 3 fan slim form factor two-pass radiator 398mm x 133mm x 29.6mm (L x W x H) 16 FPI 25 Micron Copper Fins Now optimized for sub-800 rpm ultra-stealth fans Supercruise optimizations for scalable performance with higher speed fans 15% more tubing area in the same Black Ice GTS 360 form factor Increased internal coolant flow rates Standard G 1/4 inlet/outlet fittings Standard M4 mounting threads Compatible with Black Ice Pro III, Black Ice GTS 360 radiators Black Carbon high quality finish Fully ROHS Compliant 100% Made from conflict-free materials Industry standard Black Ice quality Lifetime warranty against manufacturing defects* * Limited warranty information: www.hardwarelabs.com/nemesis/warranty
该黑冰复仇女神 360 GTS 专为专业 casemod 专业的性能、设计并建立优质需要不会有任何影响的方法。 使用新的复仇女神 平台也可以利用的极端三重140 mm 风扇 ultra-stealth 噪音水平的性能。 140 mm x 3风扇 Xtreme 外形 two-pass 散热器。 395 mm x 133 mm x 29.6 mm ( L x W x H ) 。 16 FPI 25微米铜散热片。 现在精选 sub-800 RPM ultra-stealth 粉丝。 supercruise optimizations 为可伸缩性能更高速度粉丝。 15% 相同黑冰更管区域 GTS 360外形。 增加内部冷却的流量。 标准 g 1/4英寸螺纹接口 / 插座配件。 标准 M4安装线。 定制黑色碳纤维 的高品质抛光。 完全符合 ROHS 标准。 *** 无冲突的材料制成。 行业标准黑冰 品质。 终身保修的制造缺陷
无顾客评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
此商品在美国亚马逊上最有用的商品评论

One thing to keep in mind is ALL rads need to be flushed prior to installation. I’ve been though several that say “Cleaned prior to packaging”. None of them, including this one have been completely cleaned from the manufacturing process. Maybe on the outside but every single one I’ve installed, and it’s be A LOT as I not only do my own HEDT machine I do custom builds for others for a little side $$ they have all had gunk in them. Don’t laugh but my method works well. Lay Rad on back with poets facing up, get a can of Coca Cola and fill it up. Leave it sit overnight and you will wake up to green funk bubbles out. Flush for 5 mins or so with hot tap water then fill with distilled water and shake around for a rinse and let it dry out before installation. Funk free every time. You can look in through the ports and see nice shiny copper!

Even after 25+ rinses with boiling distilled water (took me several hours), I am still getting debris when emptying the rad into a white bowl. I've attached a picture, with the bowl on the left just a regular bowl of clean water for comparison, and the right bowl containing what came out of the rad after rinse 25.
If you happen to get a clean rad, great. If not, you may have a long night ahead of you.
I'm knocking off two stars because this much debris can absolutely wreck your expensive watercooling components. A few rinses is reasonable, but the fact that I'm still getting dirt after 25 rinses is a bit much.
Edit 6/29/2020: In the end, I wound up rinsing each radiator over 80 times each (I have three of them), which took several days. I even did a couple vinegar baths, followed by sodium bicarbonate to clear it all out, checking the pH levels to ensure things were back to normal, followed by several distilled rinses.
I wanted to really make sure these were clean, as the previous iteration of rads which resulted in GPU gunking were a possible error source.
I ran the GPU block with the pump by itself with distilled water for a few days with no issues. I then hooked in my three rads, and the block turned dirty-brown over a single night.
As far as I'm concerned, these rads are unusable - they are so dirty that even after 80 rinses each, they're still gunking everything up. It's possible that I am a corner case but it's still a case nonetheless. Lowering my rating to 1 star.

2020年6月13日 在美国审核
Even after 25+ rinses with boiling distilled water (took me several hours), I am still getting debris when emptying the rad into a white bowl. I've attached a picture, with the bowl on the left just a regular bowl of clean water for comparison, and the right bowl containing what came out of the rad after rinse 25.
If you happen to get a clean rad, great. If not, you may have a long night ahead of you.
I'm knocking off two stars because this much debris can absolutely wreck your expensive watercooling components. A few rinses is reasonable, but the fact that I'm still getting dirt after 25 rinses is a bit much.
Edit 6/29/2020: In the end, I wound up rinsing each radiator over 80 times each (I have three of them), which took several days. I even did a couple vinegar baths, followed by sodium bicarbonate to clear it all out, checking the pH levels to ensure things were back to normal, followed by several distilled rinses.
I wanted to really make sure these were clean, as the previous iteration of rads which resulted in GPU gunking were a possible error source.
I ran the GPU block with the pump by itself with distilled water for a few days with no issues. I then hooked in my three rads, and the block turned dirty-brown over a single night.
As far as I'm concerned, these rads are unusable - they are so dirty that even after 80 rinses each, they're still gunking everything up. It's possible that I am a corner case but it's still a case nonetheless. Lowering my rating to 1 star.



Update: dent isn't causing it to leak and running a little distilled water and vinegar removed everything from the inside updated stars still left one off since it did come with a dent from the manufacturer.

2017年12月18日 在美国审核
Update: dent isn't causing it to leak and running a little distilled water and vinegar removed everything from the inside updated stars still left one off since it did come with a dent from the manufacturer.







I actually bought two of these. Both have the same issues. I tried using the 120x25mm Noctua fans and the screws for mounting the fans to the radiator barely make it into the thread holes. The screws need to be a 3mm longer. The material they use for the radiator shroud is extremely soft. You will end up stripping one or two trying to figure out the right amount of torque to use. The finish on the shroud is extremely delicate. You will scratch it off just by trying to get the screws mounted.
Needless to say I scratched the radiators and stripped some mounting holes even being as careful as I could be. The fit isn't great and I feel like they aren't as secure as they should be. Especially given that they will have fans attached and possibly a pump. Not being able to properly torque down screws with hardware that causes vibrations makes me nervous. Especially when your PC build is EXPENSIVE.
I wish I had the packaging to return these in. I'm replacing them with EK slim radiators. Very disappointed in the quality and material used in these radiators. Stay away from these.