Brand | CORSIAR 美商海盗船 |
---|---|
制造商 | Corsair |
型号 | CSSD-BRKT2 |
商品尺寸 | 14.48 x 10.08 x 2.29 cm; 45.36 克 |
Is Discontinued By Manufacturer | 不是 |
颜色 | 黑色 |
CPU生产商 | Refer_Manual |
CPU核心数量 | 1 |
硬盘描述 | Solid State Hard Drive |
硬盘接口 | ATA |
电源类型 | 交流电 |
硬件平台 | Refer_Manual |
是否包含电池 | 不是 |
商品重量 | 45.4 g |
亚马逊的其他卖家
CORSIAR 美商海盗船 双 SSD 安装支架 3.5 英寸(约8.89厘米) CSSD-BRKT2,黑色
Corsair Dual SSD Mounting Bracket 3.5" CSSD-BRKT2
页面含机器翻译,中文仅供参考,以原文为准

-
商品满3件可享10%的折扣。
购买亚马逊海外购活动商品满3件,即可享受售价9折优惠。 点击查看全部参加活动商品 由 亚马逊日本 提供。 如何获得促销优惠 (促销说明)
-
买满2件售价9.5折优惠。
购买亚马逊海外购活动商品满2件,即可享受售价9.5折优惠。 点击查看全部参加活动商品 由 亚马逊日本 提供。 如何获得促销优惠 (促销说明)
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥22.51×3期 | ¥1.52 (2.3%) | ¥67.53 |
¥11.53×6期 | ¥2.97 (4.5%) | ¥68.98 |
¥5.95×12期 | ¥4.95 (7.5%) | ¥70.96 |
提升您的购买力
- 适合与至少一个 3.5 英寸内部驱动器托架的台式机
- 兼容所有 Corsair SSD 以及其他生产商的所有固态硬盘;高品质黑色阳极氧化铝
- 安装简单、干净、方便。 包括3x 4个用于固态硬盘和适配器安装的固定螺丝;尺寸:145mm x 101mm x 23mm
- 供货范围:Corsair SSD 安装框架(适用于 2 x SSD 6.4 厘米(2.5 英寸)至 8.9 厘米(3.5 英寸))黑色(CSSD-BRKT2)
- Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay
- Adapts 3.5" internal drive bay for use with up to two 2.5" SSDs
- Compatible with all Corsair SSDs, as well as all other brands
- Supports 7mm and 9.5mm height standard SSDs
- Adjustable mounting holes for symmetrical and asymmetrical dual SSD mounting
- Enough clearance for connecting SATA cables without strain to SATA connector
- Includes 2 sets of SSD mounting screws and 1 set of adapter mounting screws
- Easy, hassle-free and clean installation
亚马逊海外购
经常一起购买的商品
产品信息
技术细节
更多信息
ASIN | B016498CK0 |
---|---|
用户评分 |
4.7 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第2,151名电脑\IT (查看商品销售排行榜电脑\IT) 商品里排第12名硬盘架 |
Amazon.cn上架时间 | 2015年10月9日 |
我来补充
商品描述
<p><b>The SSD mounting bracket that solves two problems at once</b></p> <p>The Corsair Dual SSD Mounting Bracket solves the problem of upgrading desktop PCs which only have 3.5" hard drive bays. Installation is straightforward: place one or two SSDs into the bracket with the screws provided, and then attach the bracket to any standard 3.5" drive bay. The black anodized aluminum looks great in any case, and it's designed to allow extra clearance for connecting SATA data cables without straining the connectors.<br /><br />The ability to stack two SSDs in the same bracket gives you additional flexibility. Even if you have just one available 3.5" drive bay, you're not limited to a single solid-state drive. The adjustable mounting points support both symmetrical and asymmetrical dual SSD mounting, and it works with both 7mm and 9.5mm height SSDs.</p>
<p><b>The SSD mounting bracket that solves two problems at once</b></p> <p>The Corsair Dual SSD Mounting Bracket solves the problem of upgrading desktop PCs which only have 3.5" hard drive bays. Installation is straightforward: place one or two SSDs into the bracket with the screws provided, and then attach the bracket to any standard 3.5" drive bay. The black anodized aluminum looks great in any case, and it's designed to allow extra clearance for connecting SATA data cables without straining the connectors.<br /><br />The ability to stack two SSDs in the same bracket gives you additional flexibility. Even if you have just one available 3.5" drive bay, you're not limited to a single solid-state drive. The adjustable mounting points support both symmetrical and asymmetrical dual SSD mounting, and it works with both 7mm and 9.5mm height SSDs.</p>
双 SSD 安装架
生产商提供信息

The SSD mounting bracket that solves two problems at once
The Corsair Dual SSD Mounting Bracket solves the problem of upgrading desktop PCs which only have 3.5 inch hard drive bays. Installation is straightforward: place one or two SSDs into the bracket with the screws provided, and then attach the bracket to any standard 3.5 inch drive bay. The black anodized aluminum looks great in any case, and it’s designed to allow extra clearance for connecting SATA data cables without straining the connectors.

The ability to stack two SSDs in the same bracket gives you additional flexibility. Even if you have just one available 3.5 inch drive bay, you’re not limited to a single solid-state drive. The adjustable mounting points support both symmetrical and asymmetrical dual SSD mounting, and it works with both 7mm and 9.5mm height SSDs.
买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
此商品在美国亚马逊上最有用的商品评论

I have already installed about 15 or so of these brackets, and have decided I like them better than the Sabrent dual SSD brackets.
I have installed over 50 of the Sabrent brackets before I discovered these.
These are easier to use for the most part. Also, these put the connectors in about the same location as a regular hard drive, so it fits more brackets (such as those blue plastic ones Dell uses).
The ONLY thing that drives me nuts about these brackets is how they package the screws. It comes with 3 sets of 4 screws, each in their own little bag, which is TIGHTLY rolled up and then TAPED shut. It is really challenging to get the screws out without cutting yourself. I have written to Corsair to try to get them to change this, since I will probably be installing hundreds of these things.
These brackets are good, but some of the edges are kinda sharp. Of course, if you work on computers a lot you realize there are a lot of sharp things inside a computer case. But for you novices out there, just be careful when you handle these.
Bottom line: I prefer these over the Sabrents because of where they position the SSD connectors, and because it is easier to install a SSD in them.

If it's helpful for any of you: I installed this in combination with a Samsung 850 EVO in a 21.5" 2011 iMac. As mentioned, it took me forever to figure it out before I finally realized it needed to be installed UPSIDE DOWN in order for everything to fit properly. Hopefully that tip will save you time, and embarrassment! :) I've attached a picture for you to see...

2016年12月1日 在美国审核
If it's helpful for any of you: I installed this in combination with a Samsung 850 EVO in a 21.5" 2011 iMac. As mentioned, it took me forever to figure it out before I finally realized it needed to be installed UPSIDE DOWN in order for everything to fit properly. Hopefully that tip will save you time, and embarrassment! :) I've attached a picture for you to see...


