MYNT3D 带OLED显示屏专业打印3D笔

![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥146.03×3期 | ¥9.85 (2.3%) | ¥438.07 |
¥74.59×6期 | ¥19.27 (4.5%) | ¥447.49 |
¥38.38×12期 | ¥32.12 (7.5%) | ¥460.34 |
-
买满2件售价9.5折优惠
购买亚马逊海外购活动商品满2件,即可享受售价9.5折优惠。 点击查看全部参加活动商品 由 亚马逊美国 提供。 如何获得促销优惠 (促销说明)
提升您的购买力
- 使用专业 3D 笔观看想象力栩栩如生
- 可调节进给让你可以调节速度和流量,以便在绘图时对材料进行最佳控制
- 温度可以在 130 至 240 C 之间以 1 度的增量进行调整,以实现最佳微调
- 大型 OLED 显示屏可让您监控材料的温度,以帮助您实现各种效果
- 套件包括 3 种颜色的 ABS 塑料长丝 A/C 适配器和超薄、符合人体工程学的触控笔,1 年有限保修
亚马逊海外购
商品描述
用这款优质的笔以 3D 形式涂鸦、素描和绘画。请参阅上面的图片。它具有可变挤出速度控制和大型 OLED 显示屏,以帮助监控热量。温度可以以 1 度的增量从 130 到 240 C 调整,以帮助微调挤压材料的厚度和流速。这款绘图套件配有轻巧、符合人体工程学的触控笔、3 种颜色的 ABS 塑料和一个 100-240V AC 50 60Hz 适配器。它的功率输出为 10 瓦,输入功率为 5 伏 直流 2A,因此也可以在户外***使用。FCC、CE 和 RoHS 认证。把你的普通图纸变成 3D 艺术品。今天就订购你的!
生产商提供信息

Elevate your imagination
Hold the magic of 3D printing in your hand with the MYNT3D Professional 3D Pen. Now you can use FDM technology in any application varying from drafting and prototyping to spatial learning and three dimensional sculpting. Whether you're an engineer or an artist, the MYNT3D Pen will take your design projects to greater heights.
Works with Nearly Any 1.75mm Filament Under the Sun
We at MYNT3D believe you should be able to use any thermoplastic you wish. ABS and PLA are a given, but what about wood or bronze infused filaments? If it is 1.75mm and melts between 140-230° C, then it will work in the MYNT3D Pen.
Recommended temperatures:
- ABS: 210° C
- PLA: 175° C
- All other plastics: Reduce temperature relative to recommendations for 3D printers

Fast, Slow, and Anywhere in Between
One speed isn't good enough for your car and it's not good enough for a 3D pen either. With the MYNT3D Pen you can crank up the extrusion speed for larger fill in areas and turn it down slow to create intricate works of art. The stepless design lets you dial in the optimal speed for any task you can throw at it.
But wait, there's more
|
|
|
---|---|---|
Ergonomic shape keeps the controls always within reach and let's you manuever the pen in ways that would be impossible for a larger design. |
The MYNT3D Pen is USB powered so that it can be used with battery power banks (with at least 2A output). Take your projects outside or on the go! |
A temperature mistake with another pen could send it straight to the garbage. With MYNT3D we've got your back with a modular nozzle design that can be replaced in a matter of minutes. |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Super 3D Pen | Basic 3D Pen | Junior2 3D Pen | DesignPad + FreePad | ABS 3D Pen Filament Refill Pack | SuperPack PLA 3D Pen Filament Refills | |
Description | Functionally similar to the 3D Pen Pro but without the OLED display and discrete temperature adjustability | Simple, easy to use and reliable 3D pen for artists not needing advanced features | Updated for 2020: Low temperature 3D pen safe for younger users. Uses PCL filament. | Ultimate drawing surfaces to learn 3D pens for the first time or take your 3D projects to new heights | Filament refills for PRO, Super and Basic 3D Pens | Huge pack of filament refills for PRO, Super and Basic 3D Pens |
Plastic Type | ABS/PLA compatible | ABS/PLA compatible | PCL compatible | ABS | PLA | |
Color Count | 3 included | 3 included | 3 included | 10 | 32 | |
Filament Length | 9 meters included | 9 meters included | 9 meters included | 30 meters | 320 meters | |
Colors Included | random | random | random | Black, Bronze, Wood, Sand, Green, Blue, Red, Orange, Pink, Yellow | orange, red, blue, yellow, sky blue, sand, fluoro red, fluoro blue, fluoro green, fluoro yellow, army green, peach, forest green, galaxy blue, silver, gold, green, pink, purple, wood, yellow gold, nature, black, grey, transparent, white,4 colorchange |
基本信息
- 制造商是否已停产 : 不是
- 商品尺寸 : 20.29 x 13.21 x 6.6 cm; 340 克
- 制造商 : MYNT3D
- ASIN : B01BLQ24IW
- 型号 / 款式 : MP012-WH
- 亚马逊热销商品排名: 商品里排第1,961名电子产品 (查看电子产品商品销售排行榜)
- 用户评分:
购买提示
亚马逊海外购商品由亚马逊海外网站出售,适用使用境外网站所在的原销售地的法律、法规、标准、规范和惯例等,因此可能在以下方面区别于在中国境内出售的商品:
• 尺码:鞋服尺码表,单位转换表。备注: 如果销售品牌提供了具体的尺码表,请以品牌尺码表为准。
• 电压和电源插座:电子产品可能不支持中国的电压环境、电源插座等规格标准,需配合变压或转换设备等使用。电源使用提示。
• 美妆商品保质期:美妆商品的生产日期/保质期标注可能和国内渠道购买的产品有所区别,详见美妆商品购买提示。
• 售后服务:亚马逊海外购的商品由境外网站所在的原销售地的品牌商提供售后保修,该等保修和其他售后可能不覆盖中国,详情请联系品牌商的售后咨询。
• 标签、手册和说明书:标签、手册和说明书等未译成中文;所载成分、声称、产品描述、参考值和推荐值可能与中国标准或惯例有别。
• 其他:因出售地和使用地人群(特别是儿童、老人和残疾人等)、使用环境、消费场景与习惯不同,可能导致商品不能或不能完全适用于使用目的。
2. 清关服务:
• 根据中国海关的要求,在您购买亚马逊海外购商品时,需要提交订购人的身份证信息(目前仅支持中国居民身份证信息验证)用于清关点击这里查看详情。
• 亚马逊不会以任何理由索要您的银行卡号、验证码等信息。如遇不法分子冒充亚马逊海外购客服向您索取银行账号等信息,请及时通过联系亚马逊海外购客服或报警,敬请提高警惕。
3. 物流配送:
• 关于配送时间的预估仅供参考,实际配送受清关或天气等不可抗力因素的影响,您可在“我的订单”中跟踪包裹查看配送状态,如有疑问请联系客服咨询。
• 亚马逊海外购商品符合海关进出口政策要求,且支持中国除港澳台地区之外的全境配送,但部分偏远地区的配送时间会相应延长,少数商品不支持配送。如果您已成功下单而我们无法为您配送,我们会及时通知您。
• 亚马逊海外购商品目前不支持晚间送货、预约送货、自提等服务。
4. 其他:亚马逊海外购出售的境外商品仅限个人自用,购买行为必须遵循自用、合理数量原则,不得转为其他商业用途,不得再次销售。
5. 需要更多帮助,请查看亚马逊海外购帮助中心。
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
此商品在美国亚马逊上最有用的商品评论

Nice storage box with magnetic closure...
These kits get rearranged all the time, and the included "extra heating element" they mentioned was not included, so I purchased one here at Amazon... only a few bucks. I like having a backup.
I don't draw with it. I use it mostly for 3D printing work, building objects, repairs, welding plastic pieces together, and so forth. I use a soldering iron, hotmelt glue gun, welder... various things.... but this pen shuts itself down.
When I reach for it, I know I'll have to press a button, sit there, and wait for it to reheat. By the time it does, whatever I'm working on probably cooled and hardened, and that also needs re-heating.
This is a constant, and I suspect will be a perpetual annoyance.
I'd like to eliminate that 2 minute auto-shut-down. I bet it's as easy as plugging the pen into a computer USB port, and reprogramming one number...
I made a spool and holder to fit this pen. It holds about 25 feet of filament.
If you know someone with a 3D printer, they can find the STL print files on Thingiverse and print one for you....
Go to Thingiverse dot com and search for "Spool for MYNT3D Pro 3D Pen".
One other thing... The provided USB cord is the stiff kind. Not a soft, silicone type.... You gotta fight the weight and stiffness of the cord. The cord is stamped with a 300 volts rating. That might be a little overkill...


评论于 2022年12月20日 在美国 🇺🇸 发布
Nice storage box with magnetic closure...
These kits get rearranged all the time, and the included "extra heating element" they mentioned was not included, so I purchased one here at Amazon... only a few bucks. I like having a backup.
I don't draw with it. I use it mostly for 3D printing work, building objects, repairs, welding plastic pieces together, and so forth. I use a soldering iron, hotmelt glue gun, welder... various things.... but this pen shuts itself down.
When I reach for it, I know I'll have to press a button, sit there, and wait for it to reheat. By the time it does, whatever I'm working on probably cooled and hardened, and that also needs re-heating.
This is a constant, and I suspect will be a perpetual annoyance.
I'd like to eliminate that 2 minute auto-shut-down. I bet it's as easy as plugging the pen into a computer USB port, and reprogramming one number...
I made a spool and holder to fit this pen. It holds about 25 feet of filament.
If you know someone with a 3D printer, they can find the STL print files on Thingiverse and print one for you....
Go to Thingiverse dot com and search for "Spool for MYNT3D Pro 3D Pen".
One other thing... The provided USB cord is the stiff kind. Not a soft, silicone type.... You gotta fight the weight and stiffness of the cord. The cord is stamped with a 300 volts rating. That might be a little overkill...





评论于 2023年1月22日 在美国 🇺🇸 发布


