商品尺寸 | 22.99 x 22 x 13 cm; 1.46 公斤 |
---|---|
产品颜色 | 黑色//白色 |
制造商 | Fluid Audio |
型号 | DS8 |
尺寸 | 7-8" |
商品重量 | 1.46 kilograms |
Fluid Audio DS8 扬声器支架,2 件
Fluid Audio DS8: Decoupling adjustable monitor stand for 6-8" speaker loaded studio monitors
页面含机器翻译,中文仅供参考,以原文为准
欢迎选购其他类似产品。
- 适用于带7或8英寸(约17.7厘米)低音扬声器的工作室显示器
- 高度:3.5 英寸(约 8.9 厘米)或 6.3 英寸(约 16 厘米)
- 倾斜角度:0、3 或 6
- 尺寸(宽 x 深):20.5 x 22 厘米。
- 4 个短垫片(7.25 厘米);4 个长垫片(14.5 厘米);2 个支撑框架;10 个橡胶盖(10 毫米);5 个橡胶盖(18 毫米);10 个螺丝(用于安装垫片)。
- Fits most 6in to 8in studio monitors / speakers
产品信息
技术细节
更多信息
ASIN | B072R7FM9H |
---|---|
用户评分 |
4.3 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第2,330名乐器 (查看乐器商品销售排行榜) 商品里排第1名录音监听音箱支架 |
Amazon.cn上架时间 | 2017年7月17日 |
我来补充
商品描述
The Fluid Audio DS8 desktop monitor stands are designed for use with most 6in to 8in 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 3 and 6. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt. Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or beamy), getting them up and closer to ear level means you hear a more full-frequency response.
The Fluid Audio DS8 desktop monitor stands are designed for use with most 6in to 8in 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 3 and 6. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt. Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or beamy), getting them up and closer to ear level means you hear a more full-frequency response.
Fluid Audio DS8台式显示器支架设计用于大多数 6 英寸至 8 英寸双向工作室监视器。 它们能够将您的显示器提升到两个高度:3 和 6。 通过附带的橡胶脚,支架成为隔音隔离系统,可调整3个角度:平移、3度或6度。 将显示器升高到耳水平意味着您可以获得更好的轴响应。 由于高音扬声器的高频率可以有点定向(或波音),使它们向上和更接近耳朵水平意味着您听到更全频响应。
购买提示
亚马逊海外购商品由亚马逊海外网站出售,适用使用境外网站所在的原销售地的法律、法规、标准、规范和惯例等,因此可能在以下方面区别于在中国境内出售的商品:
• 尺码:鞋服尺码表,单位转换表。备注: 如果销售品牌提供了具体的尺码表,请以品牌尺码表为准。
• 电压和电源插座:电子产品可能不支持中国的电压环境、电源插座等规格标准,需配合变压或转换设备等使用。电源使用提示。
• 美妆商品保质期:美妆商品的生产日期/保质期标注可能和国内渠道购买的产品有所区别,详见美妆商品购买提示。
• 售后服务:亚马逊海外购的商品由境外网站所在的原销售地的品牌商提供售后保修,该等保修和其他售后可能不覆盖中国,详情请联系品牌商的售后咨询。
• 标签、手册和说明书:标签、手册和说明书等未译成中文;所载成分、声称、产品描述、参考值和推荐值可能与中国标准或惯例有别。
• 其他:因出售地和使用地人群(特别是儿童、老人和残疾人等)、使用环境、消费场景与习惯不同,可能导致商品不能或不能完全适用于使用目的。
2. 清关服务:
• 根据中国海关的要求,在您购买亚马逊海外购商品时,需要提交订购人的身份证信息(目前仅支持中国居民身份证信息验证)用于清关点击这里查看详情。
• 亚马逊不会以任何理由索要您的银行卡号、验证码等信息。如遇不法分子冒充亚马逊海外购客服向您索取银行账号等信息,请及时通过联系亚马逊海外购客服或报警,敬请提高警惕。
3. 物流配送:
• 关于配送时间的预估仅供参考,实际配送受清关或天气等不可抗力因素的影响,您可在“我的订单”中跟踪包裹查看配送状态,如有疑问请联系客服咨询。
• 亚马逊海外购商品符合海关进出口政策要求,且支持中国除港澳台地区之外的全境配送,但部分偏远地区的配送时间会相应延长,少数商品不支持配送。如果您已成功下单而我们无法为您配送,我们会及时通知您。
• 亚马逊海外购商品目前不支持晚间送货、预约送货、自提等服务。
4. 其他:亚马逊海外购出售的境外商品仅限个人自用,购买行为必须遵循自用、合理数量原则,不得转为其他商业用途,不得再次销售。
5. 需要更多帮助,请查看亚马逊海外购帮助中心。
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
此商品在美国亚马逊上最有用的商品评论

PROS:
The stand is very sturdy, and once you've screwed everything in, absolutely nothing rattles, has give, flexes, etc.
The rubber feet have good non-slip feel to them. No worry about the stand or the speaker slipping.
Personally, I think they look much better and feel much more sturdy than IsoAcoustics. I know IsoAcoustics are popular, but I never really understood why as they don't really look that great, and seem pretty cheaply made and cost almost 3x as much as these.
For maybe what? $15 bucks more than the "foam" speaker stands?....these are an absolute no-brainer for anyone looking for a sturdy, adjustable speaker stand at a reasonable price.
Seem like they'd be easy to "upgrade" with sorbothane pads in the future if you wanted some extra vibration reduction. Personally the default feet are fine for me, but just throwing out the possibility for some people who might have challenging environments.
Also, considering that sorbothane combo would still come in under half-price of the IsoAcoustics and would certainly lead to better dampening, again, I just don't understand why people buy IsoAcoustics stands. /Shrug.
CONS:
As some other reviews mentioned, the paint/MDF can chip if you force the "clips" on too hard, so just be mindful. Being aware of that before hand helped immensely, and the one "chip" I had isn't visible when the clip was pushed in.
TIPS:
Follow the instructions. Most notably, pay attention to the the direction of the "flat/squared off" notches. Make sure they face the logo.
The pre-drilled screw holes are very tight so you may need to go ahead and screw your screws in before assembly (and screw them back out) to "widen" the holes a little.
Also, I'd test all the different angles and height pads before removing the adhesive sticker so you can get the proper height, angle alignment.


CONS: The price is a little high for what amounts to cheap MDF, plastic separators, and rubber feet, especially considering you have to do all the assembly yourself. Assembly is easy enough but the instructions aren't very straightforward on first read. Once you assemble the stands you're stuck with that configuration forever, unless you want to keep the extra parts and disassemble/reassemble them at a later date. If you're not the hoarder type, all the extra pieces make up a lot of waste that just gets tossed.

The only reason I don't give 5 stars is because the paint tends to chip off when you attach the plastic feet to the particle board. Other than that, they're great.
