商品尺寸 | 10 x 22 x 3.5 cm; 18 克 |
---|---|
产品颜色 | 浅蓝色 |
制造商 | CableMod |
商品重量 | 18 g |
CableMod AIO 套管套件系列 2 适用于 EVGA CLC/NZXT Kraken - 浅蓝色
CableMod AIO Sleeving Kit Series 2 for EVGA CLC/NZXT Kraken - Light Blue
页面含机器翻译,中文仅供参考,以原文为准
CableMod AIO Sleeving Kit Series 2 for EVGA CLC/NZXT Kraken - Light Blue
|
海外自营
广告
¥241.93¥241.93

12期7.5%费率,每月仅 ¥21.70 最高12期,多种分期方式可选 了解更多
灵活选择分期付款:结算时,选择花呗分期和您需要的分期数。此处仅为按商品金额(未包括税费)估算的示例,实际金额以结算金额为准。
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥82.51×3期 | ¥5.56 (2.3%) | ¥247.49 |
¥42.17×6期 | ¥10.89 (4.5%) | ¥252.82 |
¥21.70×12期 | ¥18.14 (7.5%) | ¥260.07 |
提升您的购买力
- 专为 NZXT Kraken 海盗船 Hydro PRO、EVGA CLC AIO 冷却器制造
- 增添鲜艳的色彩 - 无需改装
- 耐用的 ModWrap 套管
- 免工具安装
- 包含紧固夹
- Made for NZXT Kraken, Corsair Hydro PRO, EVGA CLC AIO Coolers
- Adds Vibrant Color - No Modding Required
- Durable ModWrap Sleeving
- Tool-Free Installation
- Fastening Clips Included
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B073RZGQRY |
---|---|
用户评分 |
4.0 颗星,最多 5 颗星 |
我来补充
商品描述
使用 CableMod AIO 套管套件,为您的AIO 冷却器增添鲜艳色彩。 该套件专为 NZXT Kraken、Corsair Hydro PRO、EVGA CLC 和 EVGA GPU 混合AIO 冷却器设计,是为 AIO 设置调料的*快捷*简单的方式。
CableMod AIO 套管套件从我们*的ModWrap 套管开始。 这款灵活的套筒包裹您的 AIO 管,并有各种明亮的颜色。 CableMod 的这款*新护套也与 CableMod ModMesh 套管颜色匹配,这意味着它与 CableMod ModMesh 电缆完美匹配。
安装完全是轻而易举的。 只需将 ModWrap 套筒缠绕在 AIO 管上,然后用随附的模压紧固夹完成造型。 这些夹子不仅有助于将套管固定在 AIO 管上,而且还为安装带来专业抛光。 整个免工具安装过程不到三分钟,因为不需要拆卸,不会导致您的 AIO 的保修失效。
包装内容:
2 x ModWrap 护套4 个塑料夹
1 x 说明书
兼容性列表:
Corsair 海盗船 H115i Pro RGBCorsair 海盗船 H150i Pro RGB
EVGA CLC 120
EVGA CLC 240
EVGA CLC 280
EVGA GeForce GTX 1080 Ti FTW3 Hybrid
EVGA GeForce GTX 1080 Ti SC2 Hybrid
EVGA GeForce GTX 1080 FTW 游戏混合
EVGA GeForce GTX 1080 游戏混合
EVGA GeForce GTX 1070 FTW 游戏混合
EVGA GeForce GTX 1070 游戏混合
EVGA GeForce GTX 980 Ti 混合游戏
EVGA GeForce GTX 980 混合游戏
EVGA GeForce GTX 970 混合游戏
NZXT Kraken X31
NZXT Kraken X41
NZXT Kraken X42
NZXT Kraken X52
NZXT Kraken X61
NZXT Kraken X62
NZXT Kraken X72
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
3.1 颗星,最多 5 颗星
272 条评论

Wade
5.0 颗星,最多 5 颗星
Works great on ASUS ROG RYUJIN II 360 AIO
2023年1月31日 -
已在美国亚马逊上发表已确认购买
Works great on ASUS ROG RYUJIN II 360 AIO


Wade
评论于 2023年1月31日 在美国 🇺🇸 发布
该评价的图片


Paulo Santos Alves
4.0 颗星,最多 5 颗星
Easy to use on Enermax LiqTech TR4 360 AIO, but...
2017年9月29日 -
已在美国亚马逊上发表颜色: 黑色已确认购买
For me, this product was a cosmetic and OCD need. My system has looked great ever since I bought sleeved, white, and combed cables for 24-pin, PCIe 8-pins, and EPS 8-pin cables. But, those were the only white accents in the black colored interior, which were nicely highlighted by my Blue LEDs... but something was missing.
Having a water cooler AIO for the GPU and another for my CPU (Enermax TR4 360 for my Threadripper 1950x) meant that those black sleeved tubing did not stand out, NOR blend with the ongoing theme of the case of white sleeving. THAT's when the CableMod AIO Sleeving kit came in.
I have only one so far, I might get one for my GTX 1080 Hybrid as well, but I used it on my Enermax TR4 Cooler - the tubing is only a bit larger in diameter from the NZXT and EVGA solutions, so it fits perfectly. It looked great, but the clamps were not an option. Way too tight, even if for the EVGA one (I tried it there... do not recommend). So, I used a clever trick with some black electrical tape I bought on Amazon years ago.
Here's the trick: take a piece of tape longer than the tube diameter, but not too long to have to circle it twice. Then, cover the adhesive side of the large piece of tape with a smaller piece of electrical tape (with both adhesive sides in contact) - or you can use a piece of paper, and cut it to the size you need. I did this because I did not want the adhesive to touch the sleeve, as it leaves residue behind. At the end, only a little bit of the larger tape should have adhesive exposed. Then, wrap it around the end of the sleeving (and likely of the tubing, close to the radiator or block) nice and tight, and VOILA!
I'll post the photos when I get home, but it came out PERFECT! It looks really nice now, and continues my case's theme of contrasting black with white. Although I wish the sleeving would be more closed (it lets the original tube color slip a bit between each fabric of the sleeve) and that it would be maybe $15 as opposed to $20+, it is the only solution for custom AIO sleeving.
Having a water cooler AIO for the GPU and another for my CPU (Enermax TR4 360 for my Threadripper 1950x) meant that those black sleeved tubing did not stand out, NOR blend with the ongoing theme of the case of white sleeving. THAT's when the CableMod AIO Sleeving kit came in.
I have only one so far, I might get one for my GTX 1080 Hybrid as well, but I used it on my Enermax TR4 Cooler - the tubing is only a bit larger in diameter from the NZXT and EVGA solutions, so it fits perfectly. It looked great, but the clamps were not an option. Way too tight, even if for the EVGA one (I tried it there... do not recommend). So, I used a clever trick with some black electrical tape I bought on Amazon years ago.
Here's the trick: take a piece of tape longer than the tube diameter, but not too long to have to circle it twice. Then, cover the adhesive side of the large piece of tape with a smaller piece of electrical tape (with both adhesive sides in contact) - or you can use a piece of paper, and cut it to the size you need. I did this because I did not want the adhesive to touch the sleeve, as it leaves residue behind. At the end, only a little bit of the larger tape should have adhesive exposed. Then, wrap it around the end of the sleeving (and likely of the tubing, close to the radiator or block) nice and tight, and VOILA!
I'll post the photos when I get home, but it came out PERFECT! It looks really nice now, and continues my case's theme of contrasting black with white. Although I wish the sleeving would be more closed (it lets the original tube color slip a bit between each fabric of the sleeve) and that it would be maybe $15 as opposed to $20+, it is the only solution for custom AIO sleeving.

Mick
3.0 颗星,最多 5 颗星
Looks good, but took a lot of work to make it work.
2020年7月13日 -
已在美国亚马逊上发表颜色: 红色已确认购买
I knew I was in for a battle making this fit in the first place, because my AIO model wasn't on the recommended product list. I have a Thermaltake Floe Triple Riing RGB 360. The red sleeving fit on the the AIO tubing fine, but I had to trim about an inch off the end to match the length of my tubing, which is expected. If you melt the ends to keep them from fraying, I found that the hard nylon material starts to bead up too thick and therefore the plastic clips won't fit. So I just cut them flushed and hoped for the best that the clips would keep everything from fraying apart. The sleeves are see-through so the color will darken up a little if covering black tubing. I've read the prior reviews and complaints about the plastic clips and now know they are all true. These clips are very hard to use and are poor design. These are like little puzzle pieces that only fit in one direction so it's best to try and fit the clips together first before attaching them to the tube. The clips are hard plastic and easy to break so you have to be real careful. After fighting with these hard plastic clips for an hour, I eventually got them attached, but cracked one in the process. For the expensive overall cost of the this cheap sleeve material and poor design of the clips, I cannot recommend this product. If the manufacture fixes or replaces the clips with a new design, it might worth it.
2 个人发现此评论有用

Tomas
4.0 颗星,最多 5 颗星
Very pretty sleeves, but terrible clips
2019年6月23日 -
已在美国亚马逊上发表颜色: 黑色已确认购买
Makes my NZXT Kraken X52 cooler look great in my white PC build. The sleeves look and feel great, none of my ends were frayed and they maintained their shape well.
The only downside I could find, and it is a pretty major one, is how awful the installation process is. The clips they provided in the bag to attach the sleeves to the tubes are probably one of the most over-complicated and poorly functioning clips I have ever seen, not to mention that they only gave me 7 in the box instead of the 8 you are supposed to get. After wrestling to get the clips shut for 30+ minutes I eventually gave up and took them out of my computer and was ready to ship it back for a refund; however I didn’t because my computer just looked so much better with them on, hence the 5-star review. I gave up on the clips and tossed them back in the box and just went with 2 cable ties on each end of the sleeve, which was easy enough to do albeit sacrificing on the looks department a little bit, but I definitely did a lot better than the terrible clips that CableMod provides in the box.
I gave this product a 4-star review because I love the way the sleeves look, but if I could rate the clips separately from the sleeves I’d give them a -5-star review (yes they are that bad). If you like the way the sleeves look, I recommend skipping the frustration that I went through and just secure the sleeves with cable ties like I did.
The only downside I could find, and it is a pretty major one, is how awful the installation process is. The clips they provided in the bag to attach the sleeves to the tubes are probably one of the most over-complicated and poorly functioning clips I have ever seen, not to mention that they only gave me 7 in the box instead of the 8 you are supposed to get. After wrestling to get the clips shut for 30+ minutes I eventually gave up and took them out of my computer and was ready to ship it back for a refund; however I didn’t because my computer just looked so much better with them on, hence the 5-star review. I gave up on the clips and tossed them back in the box and just went with 2 cable ties on each end of the sleeve, which was easy enough to do albeit sacrificing on the looks department a little bit, but I definitely did a lot better than the terrible clips that CableMod provides in the box.
I gave this product a 4-star review because I love the way the sleeves look, but if I could rate the clips separately from the sleeves I’d give them a -5-star review (yes they are that bad). If you like the way the sleeves look, I recommend skipping the frustration that I went through and just secure the sleeves with cable ties like I did.
7 个人发现此评论有用

Mark
4.0 颗星,最多 5 颗星
Looks Good!
2021年6月5日 -
已在美国亚马逊上发表已确认购买
I used this with a Gamdias Chione M1A-240R AIO. It was a couple of CM short but not over-obvious. After reading reviews about how hard the clips are to use I just opted not to use them, Plus I am planning on buying a different AIO anyway and wanted to save the clips for that. They were easy to put over the AIO's water tubes just a slit up the side and force it open then on. Everything stays in place nicely and as the gap is up top by the fans you really don't notice it unless you look. And like I said I plan on switching to a Larger AIO, and I do believe that the clips would help stretch the casing but didn't know if they could easily be used twice. So even though I am using it with an AIO that is not listed due to the clips I am giving it 4 Stars.


Mark
评论于 2021年6月4日 在美国 🇺🇸 发布
该评价的图片


