品牌 | Thermaltake 曜越 |
---|---|
制造商 | Thermaltake USA Direct |
商品尺寸 | 2.59 x 2.59 x 2.11 cm; 40.82 克 |
颜色 | 白色 |
是否包含电池 | 不是 |
商品重量 | 40.8 g |
Thermaltake 曜越 Pacific 4个内置O型圈 CL-W211-CU00WT-B,C-Pro G1/4 PETG OD压缩接头,6件装,白色,16mm
Thermaltake Pacific White 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W211-CU00WT-B
页面含机器翻译,中文仅供参考,以原文为准
Thermaltake Pacific White 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W211-CU00WT-B
|
海外自营
广告
¥407.73¥407.73

促销信息
买满2件售价9.5折优惠
共1个促销
-
买满2件售价9.5折优惠
购买亚马逊海外购活动商品满2件,即可享受售价9.5折优惠。 点击查看全部参加活动商品 由 亚马逊美国 提供。 如何获得促销优惠 (促销说明)
12期7.5%费率,每月仅 ¥36.59 最高12期,多种分期方式可选 了解更多
灵活选择分期付款:结算时,选择花呗分期和您需要的分期数。此处仅为按商品金额(未包括税费)估算的示例,实际金额以结算金额为准。
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥139.05×3期 | ¥9.38 (2.3%) | ¥417.11 |
¥71.03×6期 | ¥18.35 (4.5%) | ¥426.08 |
¥36.59×12期 | ¥30.58 (7.5%) | ¥438.31 |
提升您的购买力
- 配件重新想象:这个新概念使安装定制硬管液体冷却环比以往任何时候都更容易
- 四个内置O形圈:*大限度的防止泄漏,*压缩密封,让您安心无忧
- 您所期望的保护: 表面经过表面处理和特殊涂层处理,增加耐用性和防腐蚀保护
- 【按自己的方式组装】适用于G1/4螺纹端口和16毫米外径PETG,丙烯酸和铜硬管的液体冷却部件
- 包括*设计的开放式扳手
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid-cooling loops
- Four Built in O-rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open-End Wrench is Included
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B07BBBX2WQ |
---|---|
用户评分 |
4.7 颗星,最多 5 颗星 |
Amazon.cn上架时间 | 2018年8月1日 |
我来补充
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
3.8 颗星,最多 5 颗星
111 条评论

Tom R.
5.0 颗星,最多 5 颗星
Nice Product
2023年1月10日 -
已在美国亚马逊上发表尺寸: Six Pack颜色: 黑色//白色已确认购买
Very easy and versatile.

Amazon Customer
4.0 颗星,最多 5 颗星
Looks neat.
2022年7月12日 -
已在美国亚马逊上发表尺寸: Six Pack颜色: RGB已确认购买
It works and looks neat. I was excited to try it with alexa, but as it turns out that label is incorrect as the alexa feature no longer gets updated and hasn't worked with their current software in a long while. That aside, it's a bit hard to put on, but does go on, didn't have one leak and like I said, looks neat. Worth the money: maybe, would I buy again: no. But I'm not angry at it, just disappointed a big feature no longer works but they didn't mention that.

Alex
5.0 颗星,最多 5 颗星
Thermaltake is cool, good stuff. Need to keep making the Core P7 Chassis though!
2021年1月22日 -
已在美国亚马逊上发表尺寸: Six Pack颜色: RGB已确认购买
I wasn't going to do RGB for the pump and fittings, just due to the fact that I was going to use colored coolant
But since the pump/reservoir was only $20 more than the lower model, I went with the P32 D-5, which has an excellent, mostly clear cap that you can rotate the intake holes to make it easier to fit the hard tubing.
So I had to get the RGB fittings, because once you're in - you're in fully!! You'd wind up with a whole lot of controllers, but the RGB on Thermaltake is really good and their 120/140 quad fans are the best out there. I also
think the TT plus and Neon Maker software are better than motherboard software like Fusion 2.0 (what I have).
Lots of wire to hide with these fittings, but you can control them and the pump (and the water block, I got the MX1 Plus - awesome, bet looking one, imo - and it tells temperature.) If you go RGB pump, then get the P32, rather than the P22 plus - both RGB but the cap is MUCH better, for $20 - and also get the RGB fittings, they are all worth it. I have there products that work with Thermaltake RGB plus software:
4x 120 mm quad fans
1 - MX1 Plus RGB Water Block
1 - P32 D-5 RGB Pump/reservoir
1 - irgb 1000w PSU RGS (syncs to TT Plus software).
Pic included is dark so you can see the RGB. Just got the fittings today, have not had time to put on yet.
6x RGB fittings (enough for a complete loop from out radiator to back in radiator.
I don't have their RGB RAM, but it's out there - with water cooling. I don't like mixing parts in a build, mine is all Thermaltake w/ Gigabyte Vision D Motherboard and a Gigabyte GeForce 1660 Super GPU. All in all, I highly suggest Thermaltake.
Now please get me a Core P7!!!!!! I need that.....very much!
But since the pump/reservoir was only $20 more than the lower model, I went with the P32 D-5, which has an excellent, mostly clear cap that you can rotate the intake holes to make it easier to fit the hard tubing.
So I had to get the RGB fittings, because once you're in - you're in fully!! You'd wind up with a whole lot of controllers, but the RGB on Thermaltake is really good and their 120/140 quad fans are the best out there. I also
think the TT plus and Neon Maker software are better than motherboard software like Fusion 2.0 (what I have).
Lots of wire to hide with these fittings, but you can control them and the pump (and the water block, I got the MX1 Plus - awesome, bet looking one, imo - and it tells temperature.) If you go RGB pump, then get the P32, rather than the P22 plus - both RGB but the cap is MUCH better, for $20 - and also get the RGB fittings, they are all worth it. I have there products that work with Thermaltake RGB plus software:
4x 120 mm quad fans
1 - MX1 Plus RGB Water Block
1 - P32 D-5 RGB Pump/reservoir
1 - irgb 1000w PSU RGS (syncs to TT Plus software).
Pic included is dark so you can see the RGB. Just got the fittings today, have not had time to put on yet.
6x RGB fittings (enough for a complete loop from out radiator to back in radiator.
I don't have their RGB RAM, but it's out there - with water cooling. I don't like mixing parts in a build, mine is all Thermaltake w/ Gigabyte Vision D Motherboard and a Gigabyte GeForce 1660 Super GPU. All in all, I highly suggest Thermaltake.
Now please get me a Core P7!!!!!! I need that.....very much!


Alex
评论于 2021年1月22日 在美国 🇺🇸 发布
But since the pump/reservoir was only $20 more than the lower model, I went with the P32 D-5, which has an excellent, mostly clear cap that you can rotate the intake holes to make it easier to fit the hard tubing.
So I had to get the RGB fittings, because once you're in - you're in fully!! You'd wind up with a whole lot of controllers, but the RGB on Thermaltake is really good and their 120/140 quad fans are the best out there. I also
think the TT plus and Neon Maker software are better than motherboard software like Fusion 2.0 (what I have).
Lots of wire to hide with these fittings, but you can control them and the pump (and the water block, I got the MX1 Plus - awesome, bet looking one, imo - and it tells temperature.) If you go RGB pump, then get the P32, rather than the P22 plus - both RGB but the cap is MUCH better, for $20 - and also get the RGB fittings, they are all worth it. I have there products that work with Thermaltake RGB plus software:
4x 120 mm quad fans
1 - MX1 Plus RGB Water Block
1 - P32 D-5 RGB Pump/reservoir
1 - irgb 1000w PSU RGS (syncs to TT Plus software).
Pic included is dark so you can see the RGB. Just got the fittings today, have not had time to put on yet.
6x RGB fittings (enough for a complete loop from out radiator to back in radiator.
I don't have their RGB RAM, but it's out there - with water cooling. I don't like mixing parts in a build, mine is all Thermaltake w/ Gigabyte Vision D Motherboard and a Gigabyte GeForce 1660 Super GPU. All in all, I highly suggest Thermaltake.
Now please get me a Core P7!!!!!! I need that.....very much!
该评价的图片

3 个人发现此评论有用

Andrew Huggins
4.0 颗星,最多 5 颗星
Lots of cables not enough control.
2022年7月25日 -
已在美国亚马逊上发表尺寸: Six Pack颜色: RGB已确认购买
These were easy to install and have not leaked or anything using thermaltake petg tubing. The controller they give you has only 5 ports meaning you will have to have at least 2 of the fittings share a single connection. Thermaltakes RGB software is surprisingly robust but it can be a bit hard to understand, after watching some instructional videos I must say its impressive what's in there. But it takes some work.