12期7.5%费率，每月仅 ￥33.39 最高12期，多种分期方式可选 了解更多
灵活选择分期付款：结算时，选择花呗分期和您需要的分期数。此处仅为按商品金额（未包括税费）估算的示例，实际金额以结算金额为准。
 | 3至12期分期付款 由花呗分期提供 |
| 分期计划 | 手续费 | 总金额 |
|---|---|---|
| ￥126.87×3期 | ￥8.56 (2.3%) | ￥380.57 |
| ￥64.80×6期 | ￥16.74 (4.5%) | ￥388.75 |
| ￥33.39×12期 | ￥27.90 (7.5%) | ￥399.91 |
无顾客评论
此商品在美国亚马逊上最有用的商品评论
美国亚马逊：
500 条评论
Zeke
BUYER BEWARE!!!
2019年6月8日 -
已在美国亚马逊上发表已确认购买
BUYER BEWARE!!!
2019年6月7日 在美国审核
If you decide to follow their instructions on YouTube on how to replace the shell, DO NOT REMOVE ANY OF THE RIBBON CABLES! the tutorial shows to remove the ribbon cables but you do NOT have to remove them at all. Because of their dinner video I broke my left joycon and I learned from my mistake on my second run and I successfully replaced the shell on my right joycon WITHOUT removing any cables. Other than the stupid video I'm please to say that the shell is amazing and almost flawless. The design doesn't match up witch could also be annoying. Look at pictures posted and see what I'm talking about
2019年6月7日 在美国审核
该评价的图片
Karrie
Peeling
2019年6月1日 -
已在美国亚马逊上发表已确认购买
DoINeedThis
Great way to personalize your Switch
2019年4月18日 -
已在美国亚马逊上发表
Great way to personalize your Switch
2019年4月17日 在美国审核
I really like these shells. They are sturdy, hold up well under heavy use, and really add personality to your Switch. I have included a picture of three Switches, 2 with shells and 1 stock. A word of caution, as others have also stated, this is NOT the easiest of projects. I've replaced iPad screens and taken apart MacBooks and iMacs, and other various electronic gadgets over the years. While this does not rank as high in difficulty as some of those projects, it's certainly up there. There are some very small screws and the proper tools are key to avoid destroying these screws. I used a kit I had lying around from iFixIt. Patience is the key. I'd say it took me 1 1/2 to 2 hours the first try. I used the Brightech LightView PRO - LED Magnifying Glass Desk Lamp, which helped greatly. Highly recommended for experienced techies. I've also included two Pro Controllers with after market shells for color reference. You'll the light grey controller pairs up nicely with the SNES shell.
2019年4月17日 在美国审核
该评价的图片
Quaid R.
Excellent, high-quality replacement shell
2019年1月18日 -
已在美国亚马逊上发表已确认购买
Excellent, high-quality replacement shell
2019年1月18日 在美国审核
The shell set was fantastic. I've used the BASSTOP joycon shells before and I found these to be a higher quality and easier to work with. The extra screws that come with the set are also much better than the BASSTOP and even the Nintendo triwing screws. The extra buttons do come attached to the mold (or whatever it's called) and need to be cut out. If you plan to use them then you may need to file them down a bit to make sure the buttons don't stick. However I didn't find anything special about them so I used the original Nintendo buttons. I did find that the home button doesn't seem to stick out quite as far in these shells as in the OEM shells, but not in a way that's unuseable. The only issue I ran into on installing this was a stripped original Nintendo screw that had to be drilled out of the console to remove the backplate. I'm not sure if this was my fault or the quality of the included triwing screwdriver, but if you already have a higher quality driver it may be worth not being lazy like me and actually grabbing it. Still, it could just be my fault so I won't dock points for it.2019年1月18日 在美国审核
All in all the shell looks and feels great. The NES pattern print on the back does seem a touch blurrier than I'd like on very close inspection, but not in a way that's really noticeable from a distance. While ultimately the choice between this and BASSTOP would have to come down to design preference, given the lack of translucent shells here, I would recommend the eXtremeRate shells in terms of quality, provided you see a pattern you like.
该评价的图片
Aaron
Great Parts
2019年1月11日 -
已在美国亚马逊上发表已确认购买
