目前无货。
欢迎选购其他类似产品。
选择配送地址

eXtremeRate SFC SNES 经典欧式面板背板手柄,适用于 Nintendo Switch Pro 控制器,柔软触感更换手柄外壳盖,带有彩色 ABXY 按钮,适用于 Nintendo Switch Pro

4.6 颗星,最多 5 颗星 827 评论
|
分享
分享
广告

目前无货。
欢迎选购其他类似产品。
  • 定制设计的替换前外壳和手柄,完美适合 Nintendo Switch Pro 控制器。 精确切割,工作方式与原装外壳完全一样
  • 独特的替换外壳为您的 Switch Pro 增添更多个性。 更换外壳会让您的 Switch Pro 控制器在与朋友玩游戏时与众不同,标准颜色不再沉闷。
  • 安装过程需要客户拥有适度的电子安装体验。 搜索 "Extreme Rate Replace The Full Shell for Switch Pro Controller Guide (至极速更换全壳)" 或 "nrp3riEt7aA" 即可获得安装视频指南
  • 复古 SFC SNES 经典欧盟风格带您回到 90 年代。 手感柔滑,手感柔软,手感舒适;防滑、防汗,适合长时间游戏
  • 套装包括 1 个前壳、1 个底壳、2 个手柄、1 个彩色Abxy 按钮、1 个十字螺丝刀、25 个备用螺丝。 (注意:不包括控制器、按钮和其他零件。)

有问题吗?

搜索商品信息、问答、评论 ...

完成您的请求时出现了问题。请稍后尝试重新搜索。
所有 商品信息 买家问答 买家评论

您的问题可能由卖家、制造商或购买此商品的客户来回答。

请确保您输入的问题有效。您可以编辑您的问题或直接发布。

请输入问题。

基本信息

  • 商品尺寸 ‏ : ‎ 15 x 9 x 1.5 cm; 30 克
  • 制造商 ‏ : ‎ Extremerate
  • ASIN ‏ : ‎ B09HZ8M3P9
  • 型号 / 款式 ‏ : ‎ FRT103
  • 用户评分:
    4.6 颗星,最多 5 颗星 827 评论

购买提示

1. 商品和服务差异
亚马逊海外购商品由亚马逊海外网站出售,适用使用境外网站所在的原销售地的法律、法规、标准、规范和惯例等,因此可能在以下方面区别于在中国境内出售的商品:
• 尺码:鞋服尺码表单位转换表。备注: 如果销售品牌提供了具体的尺码表,请以品牌尺码表为准。
• 电压和电源插座:电子产品可能不支持中国的电压环境、电源插座等规格标准,需配合变压或转换设备等使用。电源使用提示
• 美妆商品保质期:美妆商品的生产日期/保质期标注可能和国内渠道购买的产品有所区别,详见美妆商品购买提示
• 售后服务:亚马逊海外购的商品由境外网站所在的原销售地的品牌商提供售后保修,该等保修和其他售后可能不覆盖中国,详情请联系品牌商的售后咨询。
• 标签、手册和说明书:标签、手册和说明书等未译成中文;所载成分、声称、产品描述、参考值和推荐值可能与中国标准或惯例有别。
• 其他:因出售地和使用地人群(特别是儿童、老人和残疾人等)、使用环境、消费场景与习惯不同,可能导致商品不能或不能完全适用于使用目的。

2. 清关服务:
• 根据中国海关的要求,在您购买亚马逊海外购商品时,需要提交订购人的身份证信息(目前仅支持中国居民身份证信息验证)用于清关点击这里查看详情
• 亚马逊不会以任何理由索要您的银行卡号、验证码等信息。如遇不法分子冒充亚马逊海外购客服向您索取银行账号等信息,请及时通过联系亚马逊海外购客服或报警,敬请提高警惕。

3. 物流配送:
• 关于配送时间的预估仅供参考,实际配送受清关或天气等不可抗力因素的影响,您可在“我的订单”中跟踪包裹查看配送状态,如有疑问请联系客服咨询。
• 亚马逊海外购商品符合海关进出口政策要求,且支持中国除港澳台地区之外的全境配送,但部分偏远地区的配送时间会相应延长,少数商品不支持配送。如果您已成功下单而我们无法为您配送,我们会及时通知您。
• 亚马逊海外购商品目前不支持晚间送货、预约送货、自提等服务。

4. 其他:亚马逊海外购出售的境外商品仅限个人自用,购买行为必须遵循自用、合理数量原则,不得转为其他商业用途,不得再次销售。

5. 需要更多帮助,请查看亚马逊海外购帮助中心

买家问题和答案

无顾客评论

5 星 (0%) 0%
4 星 (0%) 0%
3 星 (0%) 0%
2 星 (0%) 0%
1 星 (0%) 0%

评论该商品

与其他买家分享您的想法

此商品在美国亚马逊上最有用的商品评论

美国亚马逊: 4.3 颗星,最多 5 颗星 183 条评论
Gail
5.0 颗星,最多 5 颗星 Better than Expected!
2020年1月27日 - 已在美国亚马逊上发表
已确认购买
买家图像
5.0 颗星,最多 5 颗星 Better than Expected!
2020年1月26日 在美国审核
I got the SNES mimic case. It is quite nicely made! The texture on the material is nice, it's feels soft and grippy. It should be noted that it is NOT GREY PLASTIC, but BLACK PLASTIC PAINTED GREY. That, within itself, doesn't bother me. But, I know it might some.

That being said it is nicely done. I have played games for long sessions (8hrs+) and sweat, grime, etc has not done anything negative to the paint. It is holding up well. I will update the review should it change.

Disassembly was very easy, however assembly was a bit of trial and error. The YouTube video helped, but what they don't tell you is that it seems like the screws are self tapping. I had to screw them in quite hard to make it work. It freaked me out at first, but it seemed to the same with the original casing. For example, I had to find the right screw to tighten on the grips that slip into the handles. A couple wasn't keep it secure and it was wiggling, while one screwed all the way in.

Also, note that they give you much more screws than needed and you can easily use the ones from the original casing. Play around with whatever screws work well without stripping them. I used a combination of original and provided screws.

Lastly, my only gripe is that the buttons don't match the SNES controller exactly. I mean that the buttons are not the classic concave on top, convex on the bottom. Along with that. They have the button letters on them. If they made the right type of buttons I would seriously consider getting them. Also, I used the original D-pad since the ones provided weren't grey like the SNES.
该评价的图片
买家图像 买家图像 买家图像 买家图像
买家图像买家图像买家图像买家图像
14 个人发现此评论有用
roddykar
5.0 颗星,最多 5 颗星 “Soft touch” is the real deal. Impressed.
2020年5月15日 - 已在美国亚马逊上发表
已确认购买
买家图像
5.0 颗星,最多 5 颗星 “Soft touch” is the real deal. Impressed.
2020年5月15日 在美国审核
Extremely impressed. Minimal flexing, just like the original shells. Soft touch is the real deal. It’s why I didn’t go with the transparent shell. It’s soft and smooth to the touch, unlike regular plastic. Also, when gripping/grasping controller, it doesn’t creak—an issue I’ve had with joy-con shells from other brands.

It feels like the original thing. I’m also happy ExtremeRate didn’t put some fake switch logo at the top like other brands. The first photo is the installed shell, the 2nd, I added the switch logo myself. I’m a pretty tough critic, and have done installs like this before, so I’m pretty keen to the side effects of installing new shells (like creaking, and just not feeling original) and these are amazing.

Two downsides, although not at fault of ExtremeRate, is that I tried to fix the infamous pro controller d-pad, and can report back with no change in results, even after covering the contact points. Unfortunately, the pro controller d-pad just isn’t good. But that’s fine, I don’t use it often anyway. I also tried to fix the minor calibration issues with my left joystick (cleaned it and the housing) and can also report back with no change in results, either. Unfortunate. Minor issue, but whatever. I’ll continue working toward fixing that problem, may have to open it up again.

I’ll be back for another soft touch shell. Stunning quality.
该评价的图片
买家图像 买家图像
买家图像买家图像
12 个人发现此评论有用
Steve Mont
5.0 颗星,最多 5 颗星 Looks great and texture is better than stock Switch Pro
2021年11月19日 - 已在美国亚马逊上发表
已确认购买
买家图像
5.0 颗星,最多 5 颗星 Looks great and texture is better than stock Switch Pro
2021年11月19日 在美国审核
Installation was a bit of a complicated pain, but honestly that's part of the fun of these kinds of mods for me. Would highly recommend but only if you're not assuming it's just snap one off and snap a new one on, lot more involved than that.

Texture is really nice, smooth but grippy, and looks really sharp if you get buttons of the same color, I was on the fence about the buttons but got them and it's definitely the way to go, really modern looking. Hoping they make the joysticks in macha color someday to complete the look.

WARNING: Be incredibly careful when taking out any screws not to strip them. It's so easy to do by mistake and can ruin the whole project if you can't get a screw out. Use a LOT of pressure the first time you try so that the screw never jumps out of the grooves. I stripped the handle screws on my first attempt and had to carve away enough plastic to twist them out with clamps, it was a mess. If it was on an internal screw I would have been... well screwed. Use the right size screwdriver, one that gives you more grip and torque than the freebie they give you, invest in one of the electronic mod screwdriver sets on Amazon, they're like $15 and I use mine for all kinds of things from modding to glasses repair.
该评价的图片
买家图像
买家图像
2 个人发现此评论有用
Brandon
4.0 颗星,最多 5 颗星 My new go to controller.
2020年5月29日 - 已在美国亚马逊上发表
已确认购买
买家图像
4.0 颗星,最多 5 颗星 My new go to controller.
2020年5月29日 在美国审核
First thing, this plastic feels really nice and is soft touch. I rather be holding this than the plastic that came with the pro controller. It was really easy to assemble, I swapped the shell with no videos in about 15 minutes with no prior experience with this controller. It is much easier than the joy cons.

On the downside, this plastic is thicker. Because of its thickness, there will be larger gaps between the pieces as you can see on my second to last photo. It is also black plastic painted grey. Will it wear? I don’t know, but I know that might caution some people. Lastly, it came with a broken peg where the screen shot button goes. You can see it in my last photo in the red circle. It is supposed to be a peg like the one above the arrow, but it seems to be fallen off during manufacturing. It doesn’t necessarily need it, because the button is stabled bu the other peg, but it shouldn’t be like that.

All in all, this is my new favorite and go to controller. The positives definitely outweigh the negatives and I highly recommend getting one.
该评价的图片
买家图像 买家图像 买家图像 买家图像 买家图像
买家图像买家图像买家图像买家图像买家图像
6 个人发现此评论有用