|包装尺寸||26.2 x 13.9 x 10.1 cm; 240 克|
|产品颜色||深蓝色和黑色 + 舒适泡沫|
VR Cover 健身面部接口和泡沫舒适套装适用于 Oculus / Meta Quest 2(深蓝色和黑色 + 舒适泡沫)
VR Cover Fitness Facial Interface and Foam Comfort Set for Oculus / Meta Quest 2 (Dark Blue & Black + Comfort Foam)
- 6 个 VR 配件适用于 Oculus / Meta Quest 2:面部界面、*小、标准和舒适泡沫替换品,鼻罩和镜头盖
- 【减少雾气】面部接口支架采用通风设计,促进空气流动,防止镜片起雾。 非常适合高强度锻炼。
- 面部垫*:我们的可调节泡沫让您找到合适的尺码。 采用 PU 皮革制成,吸汗,可擦拭,卫生友好。
- 3 种类型的泡沫垫:*小泡沫,增加 FOV,标准泡沫带来类似于库存泡沫的体验和舒适泡沫带来超柔软和填充
- 6 VR accessories for Oculus / Meta Quest 2: Facial Interface, Minimal, Standard and Comfort Foam Replacements, Nose Guard and Lens Cover
- Reduces fogging: The facial interface bracket features a vented design to promote better air flow and prevent the lens from fogging up. Perfect for your intense workouts.
- Face pad upgrade: Our adjustable foams let you find the right fit. Made with PU leather, they are sweat-resistant, wipeable and hygiene-friendly.
- Relief from pressure: Softer than the original foam, these replacement covers feel great on the face and provide lasting comfort during gaming sessions.
- 3 types of foam pads: Minimal foam for an increased FOV, Standard foam for an experience similar to the stock foam and Comfort foam for extra softness and padding
Oculus / Meta Quest 2 健身面部接口和泡沫舒适套装帮助您舒适地完成虚拟现实锻炼。
这款 6 件套 Oculus / Meta Quest 2 配件套装配有面部接口、极简、标准和舒适泡沫替换垫、可拆卸的硅胶鼻托和保护性镜头盖。
专为 Oculus / Meta Quest 2 设计,面部接口支架可轻松更换原装面部坐垫,瞬间*。 享受面部界面更柔软、更灵活的感觉和为您的Quest 2 VR 耳机带来的舒适感。 为了进一步增*验,它具有减少雾气的通风口和一个可拆卸的鼻垫来解决光线泄漏。
本套装有 3 个泡沫替换件,每个泡沫厚度各不相同,为您提供完美贴合和舒适度。 超薄 Minimal 泡沫垫让您更接近镜头,增加 FOV,而标准和舒适泡沫在面部周围提供更多衬垫,以缓解耳机的压力,使其更耐磨-尤其是对于更长的虚拟现实游戏。
我们所有的泡沫都覆盖在防汗的 PU 皮革中,方便清洁和更好的卫生,与库存泡沫不同,可以根据自己的喜好在面部接口上进行调整。
您还可以使用随附的 VR 镜头盖保护镜头。 只需在会话后将其安装在显示屏上即可防止划痕和灰尘。
舒适卫生,健身界面和泡沫套装是使用 Ouest 2 获得更好的 VR 体验的必备品。
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
This interface was so comfortable as soon as I put it on that I knew I made the right choice. I didn't want to buy a bunch of accessories right away and narrowed my first choice of accessory to either a third-party facial interface or a third-party head strap. This was so comfy that I don't feel the urgent need to get a new head strap anymore.
------ Glasses spacer:
I got this set because it comes with the XL spacer & the interface works with the OEM spacer too. I've found that I don't actually need the XL spacer because it's actually so thick that the additional distance makes it a little blurry for me. Non-glasses wearers definitely felt it was too blurry for them, so I keep the OEM spacer on now. But I'm still glad I have the XL spacer just in case I get a different pair of frames that require it, or I have a friend who needs it.
I just use whichever came attached to the interface. I think it's the Standard one, but I think they all feel equally pillowy. I'm glad I got this set that comes with all three so that I have the option to mix and match for whatever distance I (or friends) need between my eyes and the lenses.
I picked this over VR cover's first edition interface partially because a review said the plastic was more flexible and this interface is wider, which both allow for a more versatile fit. I'm really happy with the width because my glasses fit really comfortably now, as opposed to being squeezed in when I used the OEM interface, which always made me worry that my glasses would get misshapen or both sets of lenses would scratch. My face is pretty narrow, and I'd say my glasses are of a pretty standard adult width, so take this into account.
------ Light leakage & nose piece:
Plenty of reviews complain about how the extra vents on the perimeter of this interface leak light into the FOV. I found that the light leakage is not very bright and only noticeable when the FOV is mostly dark. It looks like dark gray dashes around your peripheral vision and I don't even notice them when I'm actively using the Oculus, but everyone's tolerance for visual distraction is different. It is NOTHING compared to the two inches of bright light I could see from the tip of my nose when I was using the OEM interface.
Speaking of, the nose piece helps a ton with the light leakage I was getting before due to my flat nose bridge & small nose. It doesn't create a tight seal or anything, so for the remaining 1/4 inch or so of space, I just use the edge of my fingernail to pull the nose flaps a little further down to be more flush against the sides of my nose. I'd say the light leakage around my nose using this interface is brighter than the light leakage from the vents, but it's definitely tolerable for me and I'll take it over the giant 2 inch gap I had without the nose flaps.
Super happy I got this expansive set so I can mix and match to see what works for me and have options on hand for guests to customize their fit as well. The foam cushion is very comfy, the width is excellent for my glasses, the light leakage is unnoticeable during gameplay, and the nose piece deals with most of the nose gap I have due to my low nose bridge. Definitely recommend if you just got the Oculus Quest 2 and find it uncomfortable.
This VR Cover interface takes care of that problem. I can play rounds of Thrill of The Fight, be drenched in sweat, but have clear glasses!! This does nothing to cool your face, so don’t expect that, but it will keep you fog-free. No issues with sweat getting into the interface. I used the minimal foam and it no longer holds a death grip on my face/glasses. Can pull the headset off without it taking off my glasses. Other thing that is very helpful if you have a round face like me, the side wings of the plastic is soft, so kind of molds to your face.
My only con is the very slight amount of light that does come in through the vents at certain head movements. It’s so minimal and only if you turn your head at such a slight angle that the no fog tradeoff is absolutely worth it. I have zero issues with my face shape with light bleed by my nose. I barely tilt my Quest down when it’s on and I get no light through there. I took the removable nose piece off because of this, and it does NOT work with glasses. At least with thick frames, it rides up the glass itself unless you snake a finger in there and work it under the bottom the glasses. If I didn’t wear glasses, I would say the nose piece was comfortable and probably be preferred. But if you are reading this and wear glasses, just take it off and throw in the box.
I used the XL spacer with minimal foam and my glasses do not touch the VR lenses. I did not try with the stock Meta spacer. It connected so firmly with the XL spacer and the headset, that I do not want to pull apart and not get as good a connection. No rattle. I do think my eyes are closer and Field of View is clearer than before. The standard foam was just too thick and caused the interface to grab my glasses.
I was expected a cheap pleather material, but this is some smooth material that is extremely soft to touch. The minimal foam still has creases when it’s on there, but I have not noticed anything on my face after longer play sessions.
Overall, this is THE facial interface to buy. I also bought another on Amazon that came with a Lycra and mesh pads that were curved padding. The pictures for that one looked nice, but when it was delivered it just looked and felt cheap. If you wear glasses, this one works perfect and gives you a little more room in the interface. You will still sweat like crazy for some games, but your glasses remain clear. Buy this one, don’t bother with the other cheap stuff.